User Manual

www.xmarto.com
41
Password
Password of your sender email account
Encryption Type
Leave it blank in default, if failed on test, then change to SSL
Sender
Full email address of sender email account
Recipient
Full email address of receiver email account, you can set up to two recipients
Delay
The time delay on receiving email alerts
Health Message
Interval
The frequency of receiving email in normal running/operation
Tips:
 To receive email alerts, you need to check “E-Mail Notification” under Video Detection also.
 Health Message Interval only takes effect when you check “Enable”.
 If failed to pass the test email, please assure that you’ve enabled SMTP service for your email
account.
 Please refer to http://www.xmarto.com/helpcenter/?/article/2 for a more detailed email setup
guide.
5.6.4 PPPoE
Function: Supports access internet via dial-up
Operation Steps:
1) Right click the mouse to pop out NVR main menu, then click System setting – Network setting –
PPPoE, you’ll see below interface.
2) Check “Enable”, enter the Username and Password provided by ISP.
3) Click “Apply” to save the settings, and click “OK” to exit.
Tips: