Manualshelf

User Manual

ManualsBrandsxmartO ManualsElectronicsWireless Security Camera System 8CH 1080p NVR 4pcs 1.3MP Wireless Security IP Cameras, 1TB Hard Drive (Built-in Router, Plug N Play, Mobile View, Night Vision, supports 4 more Add-on Cameras)
41424344454647484950
www.xmarto.com
42
PPPoE Function: for enable PPPoE, allowing access internet via dail-up; for disable
PPPoE
5.6.5 3G
Function: This is to enable users who don’t have Internet service to use USB data stick to connect the
NVR to Internet.
Operation Steps:
1) Right click the mouse to pop out NVR main menu, then click System setting – Network setting –
3G, you’ll see below interface.
2) Check “Enable” to enable 3G Module.
3) Enter the information of Dial-Number, APN, PIN, Username, Password, etc.
4) Click “Apply” to save settings, and click “OK” to exit.
5.6.6 WiFi Setting
Function: This enables users to change settings of the NVR’s Wi-Fi hotspot and password; and some
other router related settings.
ESSID: The default Wi-Fi hotspot name of the NVR.
Password: The default password of the Wi-Fi hotspot; auto generated by the system.
Operation Steps:
1) Right click the mouse to pop out NVR main menu, then click System setting – Network setting –