User Manual

www.xmarto.com
46
2) Select the channels you want to record.
3) If you want all the channels to record, then check “All” or click “All ON”.
4) If you want to disable manual record for all channels, click “All OFF”.
5) Click “OK” to finish the manual record setup. As shown in below image.
Tips:
 Recording Priority: Alarm Recording > Motion Detection Recording > Manual Recording > Time
Scheduled Recording
5.7.2 Time-scheduled Recording
Function: Time scheduled recording enables the NVR to record 24/7 continuously or record in
specified time periods only.
Operation Steps:
1) Right click mouse to pop out NVR main menu, then click System setting – Record setting –
Record Plan. You’ll see below interface, as shown in below image.
2) Choose the Channel and set Weekday from drop-down list.
3) Schedule the times period, and check “Time”. You can set 4 times periods for each channel.
4) Click “Copy to” if you want to apply the settings to other channel or all channels.