User Manual

www.xmarto.com
47
5) Click “Apply” to save the settings and click “OK” to exit.
Tips:
 You can set up to 4 times periods for each channel per your specific recording needs.
 If you want the NVR to record 24 hours continuously, then you only need to set 1 time period,
from 0:00 - 23:59, and keep the other schedules blank.
 Different time periods will show in different color for easy differentiation.
 You can combine the various recording modes on each channel. As shown in below image.
5.7.3 Motion Detection Recording
Function: Motion detection recording enables NVR to record only when motion or movement is
detected.
Operation Steps:
1) Right click mouse on monitor to pop out NVR main menu, then click System setting – Record
setting – Record Plan. You’ll see below interface, as shown in below image.
2) Set the Channel and Weekday from drop-down menu.
3) Keep the default schedule 1 time period and check “Motion”.