User Manual

Patented Dust Barrier
Helps you make clean kills over the long term.
PS/2 Flex*
Available when using a PS/2 connection, this function lets you adjust the
polling rate-the speed at which the computer and your Razer Boomslang
communicate-from 10 to 200 Hz. Built into the Razer driver, PS/2 Flex has
been developed to give you real flexibility, and enough elbow room to adapt
to different equipment, games, and player capabilities.
4 No-slip buttons
Their rubberized surface prevents finger slippage, making it easier to be
cool  under pressure.
6 MIPS
The Razer Boomslang operates at a blazing 6 mips (millions of instructions
per second) while the traditional mouse chugs along at about 1.5 mips.
7' cord
Much longer than most, meaning you won't feel tied down, constrained,
limited. Let's say it's a new level of peripheral freedom.
USB with PS/2 adapter
InstallinG and ConnectinG
IMPORTANT: Be sure to install the driver before connecting Razer to the
computer port; if you're using a PS/2 connection, it's critical that the
computer be turned OFF when making that connection.
Turn on your computer. Insert the Razer Master Guide CD-ROM.
The Welcome screen will appear. Dutifully read it, then click NEXT.
Indicate whether you're using a USB or PS/2 connection. (You won't need to
reinstall the software should you change connections later; the software
works with either.) Click NEXT.
Select the Program Folder where the driver software will reside. Click NEXT.
Select the location for the Razer Menu. Click NEXT.
The Install screen appears. The software will load automatically; just click
NEXT.