User Manual
- 12 -
Fig.4
3. CONNECT THE DUCTWORK:
ANSI/NFPA 70-1999.
5.   Insert the wires into the box, then close the box cover, securing it using the screws 
that were previously removed.
The  appliance  must  be  installed  at  a 
minimum height of 27"  from an elec-
tric  cooker  stove,  or  30"  from  gas  or 
combined  cooker  stoves.  If  a  connec-
tion ductwork composed of two parts 
is used, the upper part  must  be placed 
outside the lower part. Do not connect 
the range hood exhaust duct air to the 
same duct air used to exhaust hot air or 
fumes from other appliances other than 
electrical.  Before  proceeding  with  the 
assembly operations, remove the anti-
grease lter(s) (Fig.4) so that the unit is 
easier to handle.










