User Manual
- 16 -
�
�
�
Fig.7: Place the bottom ue G on top of 
the  frame. Then  pull  out  the  top  ue  F 
to the  bracket and fasten it  using  the 2 
screws E.
Fig.8:  Remove  the  aluminum  panels 
by  pulling  the  lever  1 out  and  pushing 
downwards 2.
Fig.9: The lters C must be applied to the 
suction  unit  inside  the  hood,  centering 
them inside of it and turning them 90° until 
they snap into place.
Fig.10: Put the aluminum panels back in 
place (Fig.8).










