XOI27S NEED HELP? Call our ventilation experts toll free al 800-966-8300 AVEZ-VOUS BESOIN D’AIDE ? Contactez nos experts au numéro gratuit 800-966-8300 ¿NECESITA AYUDA? Póngase en contacto con nuestros expertos a través del número gratis 800-966-8300 USA RANGE HOOD - User instructions F HOTTE DE CUISINE - Notice d’utilisation E CAMPANA EXTRACTORA - Manual de utilización
XO Hood Warranty Proof of original purchase date and invoice is needed to obtain service under warranty. What is covered Limited 2 Year Warranty. For 2 years from the original date of purchase, we will provide, free of charge, parts and service labor in your home to repair or replace any part of the hood that fails because of a manufacturing defect. The warranty is extended to the original purchaser for products purchased for ordinary home use in North America.
ENGLISH USA IMPORTANT SAFETY INSTRUCTIONS FOR RESIDENTIAL USE ONLY READ AND SAVE THESE INSTRUCTIONS PLEASE READ ENTIRE INSTRUCTIONS BEFORE PROCEEDING. IMPORTANT: Save these Instructions for the Local Electrical Inspectors use. INSTALLER: Please leave these Instructions with this unit for the owner. OWNER: Please retain these instructions for future reference. Take care when using cleaning agents or detergents.
Crepes Suzette, Cherries Jubilee, Peppercorn Beef Flambè ). C. Clean ventilating fans frequently. Grease should not be allowed to accumulate on fan or filter. D. Use proper pan size. Always use cookware appropriate for the size of the surface element. E. Keep fan, filters and grease laden surface clean. F. Use high range setting on range only when necessary.Heat oil slowly on low to medium setting. G. Don’ t leave range unattended when cooking. H.
E. This unit must be grounded. WARNING - TO REDUCE THE RISK OF FIRE, USE ONLY METAL DUCTWORK. WARNING - UNDER CERTAIN CIRCUMSTANCES DOMESTIC APPLIANCES MAY BE DANGEROUS. A. Do not check filters with hood working. B. Do not touch the lamps after a prolonged use of the appliance. C. No food must be cooked flambè underneath the hood. D. The use of an unprotected flame is dangerous for the filters and could cause fires. E. Watch constantly the fried food in order to avoid the cooking oil flares up. F.
Installation Preparation DUCT FITTINGS: This Hood Must Use an 6" Round Duct. It Can Transition to 3-1/4" x 10" or 3-1/4" x 12" Duct. Use this chart to compute maximum permissible lengths for duct runs to outdoors. NOTE: Do not exceed maximum permissible equivalent lengths! Maximum duct length: 100 feet for range hoods. Flexible ducting: If flexible metal ducting is used, all the equivalent feet values in the table should be doubled.
NEVER exhaust air or terminate duct work into spaces between walls, crawl spaces, ceiling, attics or garages. All exhaust must be ducted to the outside, unless using the recirculating option. Use single wall rigid Metal ductwork only. Fasten all connections with sheet metal screws and tape all joints w/ certified Silver Tape or Duct Tape. INSTALL THE DUCTWORK: NOTE: To reduce the risk of fire, use only metal ductwork. 1. Decide where the ductwork will run between the hood and the outside. 2.
› Front of hood › Side of hood ����� ������� �������� ������� ������� �������� �������� �������� �������� ��������� › Mounting height and clearance: �������� ������� › Top of hood �� � Hood Specifications Product dimensions and clearance XOI27S: ����������������� ��� -8-
Installation Instructions Installation - Vented to the outside 1. Fixing the hood to the lower part of the wall cabinet: This type of appliance must be fitted inside a cabinet or inside another type of support structure. The overall measurements of the range hood are given in figure 1-2. Before proceeding with range hood installation, remove grille D by pressing the two side buttons A, as shown in figure 3. Fix the appliance in place using 8 screws (not supplied) which are suited to the type of cabinet.
� � Fig.3 � � � � � � � � � � � � � � � � � � Fig.4 � Fig.
POWER SUPPLY: IMPORTANT – (Please read carefully) WARNING: FOR PERSONAL SAFETY, THIS APPLIANCE MUST BE PROPERLY GROUNDED. Remove house fuse or open circuit breaker before beginning installation. Do not use an extension cord or adapter plug with this appliance. Follow National electrical codes or prevailing local codes and ordinances.
2. CONNECT ELECTRICAL: • Power Supply Connection: For connection to the power supply refer to the follows Fig.6: BLACK = L line WHITE = N neutral GREEN / YELLOW = G ground - A double-pole switch properly rated must be installed to provide the range hood power supply disconnection. - Connect the electrical conduit to the Field Wiring Compartment using listed conduit fittings. - Carry out the power supply connection in accordance with the national electric code, ANSI/NFPA 70-1999. 5.
DUCTLESS RECIRCULATING OPTION: � � � Carbon filter kit XORFK04: The kit includes an air diverter A, 2 screws and 2 expansions plugs B and 2 round filters C. To convert this model from the sunction to the filtering version, it is not necessary to use the air deviator A and the screws B. � � Fig.1: Remove the aluminum panels by pulling the lever 1 out and pushing downwards 2.
� Fig.2: The filters C must be applied to the suction unit inside the hood, centering them inside of it and turning them 90° until they snap into place. � � Fig.3: Put the aluminum panels back in place (Fig.1).
USE • If the apparatus is equipped with the following controls: A = LIGHT B = OFF C = SPEED I D = SPEED II E = SPEED III G = MOTOR WORKING indicator.
MAINTENANCE • We recommend that the range hood is switched on before any food is cooked. We also recommend that the appliance is left running for 15 minutes after the food is cooked, in order to thoroughly eliminate all contaminated air. The effective performance of the range hood depends on constant maintenance; the anti-grease filter and the active carbon filter both require special attention.
water marks. - For discolorations or deposit that persist, use a non-scratching household cleanser or stainless steel polishing powder with a little water and a soft cloth. - For stubborn cases, use a plastic scouring pad or soft bristle brush together with cleaser and water. Rub lightly in direction of polishing lines or “grain” of the stainless finish. Avoid using too much pressure wich may mar the surface. - DO NOT allow deposit to remain for long periods of time.
FUSE • The halogen lamps circuit is controlled by a fuse 5x20 mm, 125V 5A. In case of necessity it can be replaced only by specialized personnel. • Replacing halogen light bulbs: To replace the halogen lamps B, from the inside of the cooker hood press downwards with two fingers as shown in Fig.9. � � Fig.
XOI27S: ��� ��� ��� ��� �� ��� ��� ��� ��� �� ��� �� ��� ��� �� - 19 - �� ���
OPTIONS AND ACCESSORIES: Model XORFK04 Ductless Recirculating Filter Kit.
INSTALLATION PREPARATION: Check installation hardware: Locate the hardware package packed with the hood and check contents.
XOI Spec Sheet Model: XOI27S Sizes: 27-3/4" Depth: 11" Features and Benefits: - 600 CFM high velocity blower optimally removes Smoke, Grease and Odors. - 3 speed push button controls. - Two 50W Halogen Lights - Provide brilliant illumination over the cooking surface. ������ �� � �������� - Aluminum Mesh Filters - Trap airborne smoke and grease particles. They can be easily be removed for dishwasher-safe cleaning.
