+|+d n:
UNDERCOUNTER When buying any XO appliance you can be confident you have chosen a high quality, innovative and stylish product from a company that cares about you! If you require service or have questions, Help is only a phone call away call: 973-403-8900 Talk to one of our undercounter experts.
where things are 4 - 7 Before You Get Started Installer Checklist Find Your Model Safet y Instructions Electrical and Grounding Instructions 8 - 13 Installation Instruc tions Sizes and Installation Dimensions Integrated Panel Dimensions Leveling Your XO Door Handle Installation O p erating Instruc tions Control System Over view Set ting the Temperature Fun ction s Wine and Beverage Storage Shelf Instructions 14 - 2 0 C a re a n d C l e a n i n g H elpful Hints Cleaning the Interior / Exterior Changing
'+ d
2 these are the models covered in this book 15” XOU15WGS XOU15WGO 24” WINE COOLERS XOU24WGS XOU24WGO XOU24WDZGS XOU24WDZGO 15” XOU15BCGS XOU15BCGO XOU15BCSF 24” XOU24BCGS XOU24BCGO XOU24BCOF XOU24BCSF XOU24BWDDGS XOU24BWDDGO 30” BEVERAGE CENTERS XOU30BWDDGS XOU30BWDDGO take a minute to circle your model above and record your serial number here in case you need it later 5
your safety matters Pl ease re ad t hro ugh compl etely befo re using yo ur XO Unit To prevent damage to the door gasket, the door must be opened all the way before pulling shelves out. The appliance must be positioned so that the plug is accessible. Empty your XO unit before attempting to move the appliance. Moving while loaded may damage or distort the frame. The compressor will get HOT during operation / touching it may cause injury.
electricity - this is serious Failure To Fo llow All El ec trical Safet y M easures M ay Result in Serious Injur y, Fi re O r De a t h All electrical work should only be performed by an experienced, licensed electrician. INDOOR USE ONLY: All XO units MUST be grounded for safe operation and come equipped with a 3 Prong molded cord/plug for that purpose. NEVER remove or disable the 3rd prong with an adapter. NEVER use an extension cord to operate your XO unit.
a perfect fit use free standing - or - install under counter MODEL DIMENSION “A” XOU15 15” MIN XOU24 24” MIN XOU30 30” MIN 35 1/4” MAX 34 1/8” MIN ALL XO UNDERCOUNTER UNITS ARRIVE PRE-WIRED WITH LOW PROFILE PLUGS FOR EASY INSTALLATION 7" 4" WALL WALL “A” SEE CHART 90° Door Swing SS DOOR MODELS INSTALLING WITH THE HINGE SIDE Clearance NEXT TO A WALL Gap LEAVE A 2 1/4” SPACE DOOR MUST BE o ABLE TO OPEN 90 .
a perfect fit your xo is this big ( ) or small, as the case would be height & width 15” MODELS 24” MODELS (Single or Double Door) 30” MODELS ALL MODELS H ARE 34 3/32" HIGH 14 31/32" 23 27/32" 23 27/32" 29 9/16" W W W W depth MODELS WITH OVERLAY DOORS ALL OTHER MODELS THE DEPTH IS SHOWN WITHOUT HANDLES 23 11/16” D EITHER THE STANDARD OR PRO HANDLE WILL ADD 1 3/4” TO THE DEPTH 23 1/4" D CUSTOM OVERLAY PANELS MAY ADD UP TO 3/4” TO THE OVERALL DEPTH SEE PAGE 10 FOR MORE DETAILS 9
let’s face it overlay panel dimensions 15” - 24” - 30” 11 25/32” 14 7/8” 3 1/4” minimum 2 7/8” minimum 23 3/4” 3 1/4” minimum 3 1/4” minimum 2 7/8” minimum 2 7/8” minimum 2 7/8” minimum 2 7/8” minimum 30” 2 7/8” minimum 30” 30” 3 1/4” minimum 3 1/4” minimum 3 1/4” minimum XOU24BWDDGO (requires 2) XOU15WGO XOU15BCGO 14 11/16” XOU24WGO XOU24WDZGO XOU24BCGO 23 3/4” 3 1/4” minimum 2 7/8” minimum 2 7/8” minimum 30” 30” 3 1/4” minimum XOU24BCOF XOU30BWDDGO (requires 2) AFTER INSTALLT
let’s face it 2. Remove the rubber door gasket by pulling it gently out of the slot that holds it in place taking care not to damage it. You will have to replace it later. This will expose the (6) screw attachment holes. 3. Secure the overlay panel in place with clamps - use a soft non-slip pad between the jaws of the clamp and the door and panel to prevent damage during clamping - DO NOT OVER TIGHTEN. 4.
it’s like zen but cooler get your level out DO NOT NEGLECT THIS IMPORTANT STEP Rotate to raise or lower the LEVELING LEGS located at each of the four corners until all four legs are seated firmly on the floor and the interior floor of the unit is level both front to back and side to side. Failure to follow this important step may cause problems with proper door operation, excessive condensation, vibration and noise.
get a grip in fact - pick the style you like Place the handle (B) over the 2 mounting studs (A) on the door frame with the set screws (C) pointing down. Push the handle tightly against the door and tighten both of the 2 set screws (C) with the hex key (D) Keep the hex key in a safe place for future use. Two extra set screws are included in the hardware bag. Handle Option Your XO Wine Cellar comes with a stainless bar handle standard.
meet your xo CONTROL PANEL (Hiding up here) CARBON FILTER CARTRIDGE (replace every 3 to 6 months) RECIRCULATION FAN GLIDE OUT BOTTLE RACKS (Wine Cooler) OR SHELVES (Beverage Center) LOCK FRONT COOLING VENTS LEVELING LEGS 14
take control temperature Single Zone Wine Coolers and Beverage Centers have identical control panels. Single Zone Wine Cooler Temp. Settings o Factory Preset: 54 F (Ideal Storage) o o Adjustable Range: 41 F to 64 F Beverage Center Temp. Settings o Factory Preset: 43 F o o Adjustable Range: 34 F to 50 F Your Wine Cooler or Beverage Center remembers your temperature setting in case of a power failure and automatically adjusts to the previous setting when power is restored.
take control continued colors! Wh en you turn your wine cellar or beverage center, the interior light is wh ite, press and the light will ch ange to blue. Press again and the light will ch ange to amber. switching modes When you turn your XO Unit on, it is set to work in standard mode. Press ECO mode is turned on. ECO Mode is an energy saver function. again, ECO mode is turned off and it returns to standard mode. Press ECO Mode also serves as SABBATH Mode.
single zone control beverage centers or 1 zone wine coolers ON /OFF But ton Press & Hold for 1 Second to turn ON Press & Hold for 3 Seconds to turn OFF Press to Silence Alarm Light Function But ton Toggle Bet ween 3 Light Functions L1, L2, L3 TEMPER ATURE D ISPL AY Indicator Light Cooling Mode ON Press to raise temperature Press to lower temperature Ch anges interior light color Toggles bet ween different operating modes Th e temperature set ting can be ad justed from 41-64°F.
dual zone control 2 zone wine coolers ON /OFF But ton Press & Hold for 1 Second to turn ON Press & Hold for 3 Seconds to turn OFF Press to Silence Alarm Light Function But ton Toggle Bet ween 3 Light Functions L1, L2, L3 TEMPER ATURE D ISPL AYS U PPER | LOW E R Indicator Light Coolin g M ode O N LOW E R U PPE R Press to raise temperature Press to lower temperature Ch anges interior light color Toggles bet ween different operating modes Upper compar tment:Th e temperature set ting can be ad justed
how many wine bottles can this hold Wine bottles come in many shapes and sizes. The following MAXIMUM capacities are based on two of the most popular types in 750 ml.
juggling space is easy with xo STEP 1: Remove the shelf FULLY EX TEND THE SHELF STEP 2: Remove and re -position the shelf glides REAR SHELF GLIDE SUPPORT LIFT THE FRONT REAR SHELF GLIDE SUPPORT FRONT SHELF GLIDE SUPPORT LIFT UP PULL OUT STRAIGHT FRONT SHELF GLIDE SUPPORT SHELF GLID E SHELF GLIDE STEP 3: Reverse the steps. Install the right and lef t SHELF GLID ES in their new position by pushing the pins into the slots and click the front of the glide down to secure. Replace the shelf.
a little tlc goes a long way C l e a n i n g t h e I n s i d e: Walls, floor, inside window, and shelves - Some water deposits and dust can be removed with a dry paper towel, others may require a damp cloth. Cleaning the Outside: Outer case - It is important to keep the area clean where the door seals against the cabinet. Clean this area with a soapy cloth. Rinse with a damp cloth and let dry. Control Panel and Door - Wipe with a damp cloth and dry thoroughly.
a breathe of fresh air for best results change every 3 to 6 months Your Air Refres h Ch arcoal Filter I s Located H ere P/N: XOUAIRFILTER Rotate t h e filter 1/ 4 tu rn to u n lo ck Pull straight out to remove Align the tabs and inser t the new filter Rotate filter 1/ 4 tu rn to lock in place 22
faq’s Q. There doesn’t appear to be any power to the unit. A. There are 3 easy to check common causes: (1) Check to see if a fuse has blown or circuit breaker has tripped & replace or reset. (2) Check to ensure the plug is fully inserted into the outlet. (3) A power surge may have caused the unit to shut down to protect itself - Unplug the unit, wait 5 seconds and plug it back in. Q. The cabinet temperature is too high. A. Check these 5 things: (1) Check the temperature setting and adjust as needed.
we’ve got your back 90 DAY LOVE IT or LEAVE IT. For 90 Days all our products are backed by our unique Love it or Leave it Guarantee. TWO-YEAR PARTS & LABOR LIMITED WARRANTY. XO warrants to the original purchaser of every new XO refrigerated unit, the cabinet and all parts thereof, to be free from defects in material or workmanship under normal and proper use and maintenance as specified by XO and upon proper installation and start-up in accordance with the instruction packet supplied with each XO unit.
