XOU30BWDDGO PANEL READY FRENCH DOOR COMBO I worked really hard on this manual so please read it...
UNDERCOUNTER When buying any XO appliance you can be confident you have chosen a high quality, innovative and stylish product from a company that cares about you! If you require service or have questions, Help is only a phone call away call: 973-403-8900 Talk to one of our undercounter experts. CONGRATULATIONS on purchasing your XO. Before you proceed, take just a moment to register your XO at: www.xoappliance.
where things are 4 - 7 Before You Get Started Installer Checklist Find Your Model Safet y Instructions Electrical and Grounding Instructions 8 - 13 Installation Instruc tions Sizes and Installation Dimensions Integrated Panel Dimensions Leveling Your XO O p erating Instruc tions Control System Over view Set ting the Temperature Fun ction s Wine and Beverage Storage Shelf Instructions 14 - 19 Care and Cl eaning H elpful Hints Cleaning the Interior / Exterior Changing the Carbon Air Purification Filter
'+ d
2 these are the model covered in this book BEVERAGE CENTER | WINE COOLER COMBO XOU30BWDDGO record your serial number here in case you need it later 5
your safety matters Pl ease re ad t hro ugh compl etely befo re using yo ur XO Unit To prevent damage to the door gasket, the door must be opened all the way before pulling shelves out. The appliance must be positioned so that the plug is accessible. Empty your XO unit before attempting to move the appliance. Moving while loaded may damage or distort the frame. The compressor will get HOT during operation / touching it may cause injury.
Failure To Fo llow All El ec trical Safet y M e asures M ay Re sult in Serious Injur y, Fi re Or Deat h All electrical work should only be performed by an experienced, licensed electrician. INDOOR USE ONLY: All XO units MUST be grounded for safe operation and come equipped with a 3 Prong molded cord/plug for that purpose. NEVER remove or disable the 3rd prong with an adapter. NEVER use an extension cord to operate your XO unit.
a perfect fit use free standing - or - install under counter ALL XO UNDERCOUNTER UNITS ARRIVE PRE-WIRED WITH LOW PROFILE PLUGS FOR EASY INSTALLATION 35 1/4” MAX 34 1/8” MIN 7" 4" WALL 30” 90° Door Swing DOOR MUST BE ABLE TO OPEN A MINIMUM OF 90 o . Clearance Gap THE DOOR STOP IS SET AT 110 WHEN INSTALLING WITH THE HINGE SIDE NEXT TO A WALL LEAVE ADEQUITE SPACE FOR CABINET HANDLES o o o - BUT CAN BE REST TO 90 OR 140 IF NEEDED. IF THE DOOR CAN’T OPEN FULLY - YOU CAN’T PULL THE SHELVES OUT.
a perfect fit your xo is this big ( or small, as the case would be ) height & width XOU30BWDDGO 30” COMBO H 34 1/8” HIGH 29 7/8” WIDE W depth MODELS WITH OVERLAY DOORS DOOR MUST BE ABLE TO OPEN 90 O MINIMUM TO ALLOW SHELVES AND RACKS TO EXTEND WITH THE DOOR OPEN AT 90 O THE UNIT HAS A DEPTH OF 37 5/16” 23 3/4” TOP VIEW 90o 140 o D CUSTOM OVERLAY PANELS MAY ADD UP TO 3/4” IN OVERALL DEPTH YOUR CHOICE OF CABINET HANDLES WILL ALSO ADD DEPTH 9
overlay panel dimensions xou30bwddgo 14 7/8” (378MM) 3 3/8” (86mm) min 5” (127mm) max 29 3/4” (756mm) min 30” (762mm) max* 2 7/8” (73mm) min 2 7/8” (73mm) min 5” (127mm) max 5” (127mm) max * IF FRAME HEIGHT EXCEEDS 30” ADDITIONAL STEPS MAY BE REQUIRED. CONSULT XO 3 3/8” (86mm) min 5” (127mm) max CUTAWAY DETAIL Showing pin in hole.
let’s face it 6) screw attachment 3. Before the frame has been mounted to the door; To attach your handle hardware, at the height of your choosing, within the same gasket slot, drill counter sunk screw holes to align with your handle. door frame as a template, 6. 6 using the ST4-30 self-tapping screws provided and a phillips head screwdriver, install one screw into each of the ten holes and hand tighten flush with the frame. DO NOT OVER TIGHTEN AS SCREWS MAY STRIP OUT.
7. Drill the handle attachment holes for the fasteners through the frame (from step 3). 8. Remove the clamps (and/or tape) 9. Attach your handle using flat head or truss head bolts. 10. Re-install the rubber gasket by pressing it into the slot making sure it is evenly seated and flat. 11. Reassemble the door back onto the hinges. o The door hinge stop is set at 110 . Whille the door is off, you can o o change it to either 90 or 140 .
it’s like zen but cooler get your level out DO NOT NEGLECT THIS IMPORTANT STEP Rotate to raise or lower the LEVELING LEGS located at each of the four corners until all four legs are seated firmly on the floor and the interior floor of the unit is level both front to back and side to side. Failure to follow this important step may cause problems with proper door operation, excessive condensation, vibration and noise.
meet your xo XOU30BWDDGO COMBO BEVERAGE CENTER | WINE COOLER INDIVIDUAL CONTROL PANELS INDEPENDENT CARBON ELEMENTS INDEPENDENT COOLING FANS SIX GLIDING WINE RACKS TWO GLIDING GLASS SHELVES INDIVIDUAL DOOR LOCKS FRONT COOLING VENTS LEVELING LEGS 14
take control temperature Your Combo Beverage Center |Wine Cooler has two identical control panels. Single Zone Wine Cooler Temp. Settings o Factory Preset: 54 F (Ideal Storage) o o Adjustable Range: 41 F to 64 F Beverage Center Temp. Settings o Factory Preset: 43 F o o Adjustable Range: 34 F to 50 F Your Combo Beverage Center |Wine Cooler remembers your temperature setting in case of a power failure and automatically adjusts to the previous setting when power is restored.
take control continued colors! Wh en you turn your combo unit on, the interior light is wh ite, press and the light will ch ange to blue. Press again and the light will ch ange to amber. switching modes When you turn your XO Unit on, it is set to work in standard mode. Press ECO mode is turned on. ECO Mode is an energy saver function. again, ECO mode is turned off and it returns to standard mode. Press ECO Mode also serves as SABBATH Mode.
single zone control combo beverage center | wine coolers ON /OFF But ton Press & Hold for 1 Second to turn ON Press & Hold for 3 Seconds to turn OFF Press to Silence Alarm Light Function But ton Toggle Bet ween 3 Light Functions L1, L2, L3 TEMPER ATURE D ISPL AY Indicator Light Cooling Mode ON Press to raise temperature Press to lower temperature Ch anges interior light color Toggles bet ween different operating modes Th e beverage center temperature can be adjusted from 34-50°F.
how many...
juggling space is easy with xo STEP 1: Remove the shelf FULLY EX TEND THE SHELF STEP 2: Remove and re -position the shelf glides REAR SHELF GLIDE SUPPORT LIFT UP LIFT THE FRONT REAR SHELF GLIDE SUPPORT FRONT SHELF GLIDE SUPPORT PULL OUT STRAIGHT FRONT SHELF GLIDE SUPPORT SHELF GLIDE SHELF GLIDE STEP 3: Reverse the steps. Install the right and lef t SHELF GLIDES in their new position by pushing the pins into the slots and click the front of the glide down to secure. Replace the shelf.
a little tlc goes a long way C l e a ni ng t h e In s id e: Walls, floor, inside window, and shelves - Some water deposits and dust can be removed with a dry paper towel, others may require a damp cloth. C l e an in g t h e Ou ts i d e: Outer case - It is important to keep the area clean where the door seals against the cabinet. Clean this area with a soapy cloth. Rinse with a damp cloth and let dry. Control Panel and Door - Wipe with a damp cloth and dry thoroughly.
a breathe of fresh air for best results change every 3 to 6 months Your Air Refresh Ch arcoal Filter I s Located H ere P/N: XOUAIRFILTER Rotate th e filter 1/4 turn to un lock Pull straight out to remove Align the t abs and inser t the new filter Rotate filter 1/4 turn to lock in place 21
faq’s Q. There doesn’t appear to be any power to the unit. A. There are 3 easy to check common causes: (1) Check to see if a fuse has blown or circuit breaker has tripped & replace or reset. (2) Check to ensure the plug is fully inserted into the outlet. (3) A power surge may have caused the unit to shut down to protect itself - Unplug the unit, wait 5 seconds and plug it back in. Q. The cabinet temperature is too high. A. Check these 5 things: (1) Check the temperature setting and adjust as needed.
we’ve got your back 90 DAY LOVE IT or LEAVE IT. For 90 Days all our products are backed by our unique Love it or Leave it Guarantee. TWO-YEAR PARTS & LABOR LIMITED WARRANTY. XO warrants to the original purchaser of every new XO refrigerated unit, the cabinet and all parts thereof, to be free from defects in material or workmanship under normal and proper use and maintenance as specified by XO and upon proper installation and start-up in accordance with the instruction packet supplied with each XO unit.
