Operation Manual
Table Of Contents
- Safety instructions and precautions
- Specifications
- Package content
- Installation
- Connection schedule – ISO plug
- MB-01EU kabel adapter plug pin assignment
- MB-01EU ISO socket pin assignment
- Connection schedule – Cinch multicore
- Startup operations
- Remote control
- Menu setup
- Common solutions
- Recycling of an old unit
- Recycling of the battery
14
MB-01EU
CAR NAVIGATION SYSTEM
EN
Thema:
Startup operations
Replacement instructions:
1. Remove the battery compartment:
push it to the left rst, then pull it out.
2. Remove the old battery and insert
the new one (CR-2025 Lithium).
3. Insert the battery compartment back
into the remote control till it clicks into
place.
Startup operations
Usage of the remote control
Before the rst usage please remove
the isolation plate.
Aim the remote control at the IR
receiver on the front operating panel.
The IR receiver should not be blocked.
As soon as the remote control does
not work proper the battery should be
replaced.
Do not expose the remote control to
direct sunlight or air heater.
Replacement of the battery
The remote control is operated by
CR-2025 Lithium battery.
As soon as the remote control does
not work proper the battery should be
replaced.
!