CAR NAVIGATION SYSTEM Installation Manual OPEL-01EU Installation Manual ENGLISH
Topic: EN ENGLISH CAR NAVIGATION SYSTEM OPEL-01EU Installation Manual Thank you for purchasing one of our OPEL-01CEU products! We appreciate your confidence. Enjoy your brand new multimedia unit! i Please read the following manual carefully before you install and use the unit. Please save this manual in case you will need to clarify further possible questions regarding installation and usage of our product. We recommend you to let the technician install the unit in your vehicle.
Topic: EN Safety instructions and precautions 4 OPEL-01EU plug pin assignment 15 Quadlock-socket pin assignment 16 Handling by stop only....................... 4 Installation..................................... 4 Regular loudness............................. 4 Repair of the unit............................ 4 Power supply.................................. 4 Connection schedule – Cinch multicore 17 Replacement of fuses....................... 4 Overheating....................................
EN Topic: Safety instructions and precautions Safety instructions and precautions ! Handling by stop only To avoid any accidents please don't handle the unit while you driving. Please stop and park the vehicle at safety place and handle the unit casually. ! Installation Please read the following manual carefully before you install the unit. We recommend you to let the technician install the unit in your vehicle.
Topic: ! Safety instructions and precautions EN Cleaning of the unit Please keep the unit clean and remove the dust from it regularly. Please use for that a soft and dry cleaning rag. Major soilings can be removed carefully with the wet cleaning rag. Do not use any chemical or alcohol-containing detergents to avoid the damage of the unit's varnish. ! Usage of the touchscreen Do not press the touchscreen too hard – it may lead to image distortions, unit malfunctions and touchscreen damages.
EN Topic: Installation Installation ! We recommend you to let a professional technician install the unit in your vehicle. ! WARNING! Please read these advices carefully »» Before the installation please make sure that the vehicle has the 12 Volt on-board power supply. »» The minus (-) should be connected with the ground (GND) (negative). »» Please tag the polarity of the available speakers before you disconnect the vehicle battery. before installation procedure.
Topic: Installation EN speaker cable is in each case plugged into the negative speaker socket of the ISO interface. Do not ever connect the negative speaker cables with the vehicle body. through the engine bay in order to connect it with the vehicle battery. »» Do not ever connect speaker cables among one another. In case you do not want to connect all the 4 speakers with the unit please isolate the endings of unused cables with the electrical tape to prevent a short circuit.
Topic: EN Installation instructions Installation instructions i Please note, that this installation manual was generalized attending to provide you with the common indispensable information. Therefore it might cause from product to product some irrelevant discrepancies, especially regarding some depictions (e.g. installation accessories) You can find the detailed manual for your XOMAX product on our homepage: www.xomax.de/download 1 1 2 1 Installation steps 1.
Topic: Installation instructions EN 2 Fixierschraube then the dual-ended bolt of the unit should be pulled through one of the holes in the fixation metal sheet. 2 Fixture of the fixation sheet This step can not be accomplished in every vehicle, thus it may be possibly skipped. The fixation metal sheet should be fixated in the vehicle first, Later (see page 10) the unit will be fixed to the metal sheet with the washer and the nut.
EN Topic: Installation instructions 4 click 4 Connect the unit Please connect the ISO cable first with the ISO plug of the unit, then with the one of the vehicle. Do not forget to connect the radio aerial. Now slide the unit carefully into the already fixated frame till it clicks into place. 5 fixation metal sheet fixation bolt fixation nut 5 Fixture of the unit This procedure refers to the step 2 and may be possibly skipped as well.
Topic: Deinstallation instructions EN Deinstallation instructions 1 1 Prepair the instruments To deinstall the unit you will need a spanner (a wrench) to unloose the fixation nut and 2 extraction keys (optional) to release the unit from the installation frame. 2 unloose the fixation nut This step may be possibly skipped, if due to the lack of space the unit initially was not fixated to the fixation metal sheet.
EN Topic: Deinstallation instructions 3 extraction keys 3 Use the extraction keys Please insert the extraction keys into the dedicated recesses between the installation frame and the unit's housing. In each case the key should be inserted centered, the inserting point should be equally distanced both from the top and from the bottom. 4 unlocking holding side-cogs 4 Unloose the unit can be carefully pulled out.
Topic: Deinstallation instructions EN 5 Afterwards please disconnect all the cables incl. the ISO multicore. 6 Remove the unit Now pull the unit carefully out of the installation frame or out of the car radio slot in case the frame was already firmly fixed to the unit by delivery. 6 5 Remove the installation accessories Finally remove all the installation accessories such as fixation metal sheet and installation frame.
EN Topic: Connection schedule – OPEL plug / socket (Quadlock) Connection schedule – OPEL plug / socket (Quadlock) CAR NAVIGATION SYSTEM 14 OPEL-01EU
Topic: OPEL-01CN plug pin assignment EN OPEL-01EU plug pin assignment CAR NAVIGATION SYSTEM 15 OPEL-01EU
EN Topic: Quadlock-socket pin assignment Quadlock-socket pin assignment Socket B (loud speakers) QB1 - (-) rear right (violet/black) QB2 - (+) rear right (violet) QB3 - (-) front left (gray/black) QB4 - (+) front left (gray) QB5 - (-) front right (white/black) QB6 - (+) front right (white) QB7 - (-) rear left (green/black) QB8 - (+) rear left (green) Socket A (power supply) QA1 - spare QA2 - Can High (gray/black) QA3 - spare QA4 - Can Low (green/black) QA5 - +12V permanent power (yellow) QA6 - spare
Topic: Connection schedule – Cinch multicore EN Connection schedule – Cinch multicore CAR NAVIGATION SYSTEM 17 OPEL-01EU
EN Topic: Common solutions Common solutions The following advices are generally valid and refer to diverse Xomax models with the similar characteristics. Please note that some articles may refer not to your model exactly and contain the describtion of features and functions that your model does not support. The describtion of the problem The cause and the solution The remote control is without function. Solution 1: Please ensure that the battery film is removed.
Topic: Common solutions Poor radio reception: The radio tuner finds no broadcaster or the reception is poor. EN For problem-solving regarding the radio reception it is important to know the type of the antenna of your vehicle. Here are the possible solutions for each type of the antenna: Type 1 – passive antenna (see page 36 – wiring diagram): We recommend you to substitude the existing antenna by the larger and therefore more efficient one.
EN Topic: Recycling of an old unit/Recycling of the battery Recycling of an old unit User information regarding recycling of electric and electronic devices (private households) Recycling of the battery According to the battery decree we make you aware of your obligation to dispose of empty batteries at municipal collection points. Batteries that contain pollutants (e.g. Hg = mercury, Pb = lead, Cd = cadmium) are labelled with the symbol pictured above.
