Operation Manual

INSTALLATION/OW UER’S MANUAL

Car Navigation System

-4-

-5-

-6- -7-

-8-

Notes on installation

-3-

-9- -10-

-2-

The unit is designed for 12V DC, negative ground operation systems only. Before installing the unit, make

sure your vehicle is connected to 12V DC negative grounded electrical system.

The negative battery terminal must be disconnected before making connections which can prevent damage

to the unit from short circuiting.

Be sure to connect the correct speaker to the correct terminal. Never connect the left and right channel

speaker cables to each other or to the vehicle body. Do not block vents or radiator panels. Doing so will

cause heat to build up and may result in fire.

After completion of installation and replacement of battery, press the reset button on the front panel with a

pointed object (such as a ball point pen) to set the unit to its initial status.

XM-2VRSUN730

XM-2VRSUN730 XM-2VRSUN730 XM-2VRSUN730

XM-2VRSUN730

XM-2VRSUN730 XM-2VRSUN730 XM-2VRSUN730

Common icon function instruction

Play/Pause

Stop

Previous chapter

Fast backward function

Next track

Fast forward function

Click into Blank screen

Return to previous menu

Return to main menu

-11-

-12-

XM-2VRSUN730 XM-2VRSUN730

-15- -16-

-17-

-18-

-19-

-20-

XM-2VRSUN730

XM-2VRSUN730 XM-2VRSUN730

-13- -14-

XM-2VRSUN730

Note on installation

Main menu