XM-DTSB925 INSTALLATION MANUAL + MIC TA/AF MU/PTY _ PAIR BND CAR AUDIO/VIDEO SYSTEM 7 Inch Million Multi-color Illumination TFT Touch Screen Detachable Control Panel Remote Control Digital Video Disc Player Control Panel USB Port and AUX Input Memory Card Slot AM/FM-RDS Digital PLL Tuning Radio BT Compatible
To ensure safety while driving and to comply with laws, drivers should not watch video or operate the video device while driving.
Content Precaution...................................... 2 Automatic Memory Storing & Safety Information......................... 3 Program Scanning....................... 19 Disc Note....................................... 4 RDS function.................................. 19 Installation .................................... 5 Media Operation............................. 21 Electric Connection ...................... 8 Basic Operation .............................. 22 Remote Control ................
Precaution THANK YOU FOR PURCHASING A SOUNDSTORM MULTIMEDIA PLAYER . Before operating the unit, read this manual thoroughly and keep it handy for future reference . To avoid injury or accident , read the following precautions before installing and operating the unit . ON INSTALLATION DO NOT install any receiver in locations where; - it may obstruct the steering wheel and gearshift lever operations, as this may result in a traffic accident.
Safety Information CAUTION: THIS DIGITAL VIDEO PLAYER IS A CLASS I LASER PRODUCT. HOWEVER THIS DIGITAL VIDEO PLAYER USES A VISIBLE/INVISIBLE LASER BEAM WHICH COULD CAUSE . HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE THE DIGITAL VIDEO PLAYER CORRECTLY AS INSTRUCTED. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.
Disc Note Disc formats supported by this player Digital Digital Video Video Audio and Video Disc size 12 cm VCD VCD Audio and Video Disc size 12 cm CD CD Audio Disc size 12 cm MP3 MP3 Audio Disc size 12 cm Discs which cannot be played with this player Digital Video-RAM CDV CDG Handling and Cleaning Dirt, dust, scratches and warping disc will cause misoperation. Do not place stickers or make scratches on discs. Do not warp discs.
Installation NOTES: Choose the mounting location where the unit will not interfere with the normal driving function of the driver. Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly. Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions.
Installation Installating the unit DASH BOARD METAL MOUNTING STRAP HEX NUT SPRING WASHER PLAIN WASHER CONSOLE TAPPING SCREW SLIDE BRACKET HOUSING HEX BOLT SCREWDRIVER TABS KEY PLATE PLASTIC TRIM OUT KEY PLATE If you want to take CHASSIS out of the SLIDE BRACKET HOUSING, first remove the PLASTIC TRIM OUT of the both sides away, then insert the two KEY PLATE into left and right side of chassis as above illustration.
Electric Connection WIRING CONNECTION RCH IN RED AV IN SUBWOOFER GREY VIDEO OUT(2) YELLOW REAR CAMERA INPUT YELLOW VIDEO IN YELLOW LCH IN WHITE FRONT RCA OUTPUT CABLE REAR OUTPUT CABLE RCH RED FRONT RCA RED R VIDEO OUT YELLOW LCH WHITE FRONT RCA WHITE L RADIO ANTENNA JACK ISO CONNECTOR IGNITION SWITCH(B+) MEMORY BACK-UP(B+) GROUND(B-) RED KEY GROUND(BLACK) FUSE KEY 1(BROWN) YELLOW KEY 2(WHITE) BLACK AUTO ANTENNA FRONT LCH SPK. REAR LCH SPK.
Remote Control 15 MODE 17 7 2 MUTE PLAY/PAUSE 16 STOP 3 REDIAL ANGLE MO/ST ZOOM 19 13 22 20 PAIR 1 LOUD MENU EQ CLK LO/DX 21 6 14 23 OSD 24 18 BAND 9 ENTER TITLE/PBC A/PS VOL 11 VOL TOP RPT INT 1 2 3 10 5 4 SEL 12 RDM 6 AF 8 7 27 9 26 TA 4 SETUP GOTO +10 0 8 Ref # Button 5 25 Function 1 CLK Press it briefly to view the clock time . 2 PAIR/ 3 STOP 4 SETUP Pr es s it to us e the BT fun ct ion , ref er to se e BT op er at ion .
Remote Control Ref # Button 8 GOTO 9 / Function Press it button to begin playback at a moment in the program you designate. Use number buttons to enter the data that is needed. In BT menu, it serves as the asterisk button on your mobile handset. Press these buttons to skip ahead or back one track. 10 SEL Press the SEL(in radio mode,press and hold the SEL) to switch between BASS,TREBLE,BALANCE, SWF VOL, SWF FREQ After switching on the desired mode above, rotate VOL knob to set it.
Remote Control Function Ref # Button 23 This button is used to confirm selections and settings within many ENTER of the menus in the OSD system. In DISC mode, press it to reverse rapidly 24 25 0-9 0/TA 9/AF 26 +10/ 27 1-6 Use to input numerical values during programming, with the GOTO button, or to directly select a track to play . In Radio mode, (when the RDS engaged,), 0 serves as TA function, 9 serves as the AF function .
Basic Operation POWER ON/OFF Touch the “ ” ICON on screen to turn the unit off . Press the“ ” onthe front panel to turn It on, press it again to turn off . FIG.2 LOADING/EJECTING A DISC Loading a Disc 1. Press the POWER ( ) button on the front pane to turn the device on . Adjusting the viewing angle . When the monitor does not move, long press button on the panel to turn the monitor upward or downward at fine steps to get a desired viewing angle . 2.
Basic Operation When the monitor turns downward to a certain angle, it will draw in . GENERAL CLOCK AUDIO VIDEO FIG.6 Setup interface 1 Main Menu Operation LANGUAGE ILLUMINATION COLOR In many modes, touch the icon or touch the range to enter the main menu, the message like following as below. (1) CALIBRATION Setup interface 2 Touch the “ ” section on the setting menu, touch the “ / ” ranges to select the adjustment item, Touch the “ ” icon to return to the previous playback .
Basic Operation Disc setup as follow: RATING Select to turn Parental Control on or off. The factory default password is 0000. (The password must be used to make changes to the Parental Control menu below .) DISC FORMAT AUTO TV TYPE 16:9 RATING ADULT FORMAT This player is capable of playing discs recorded in either PAL or NTSC formats. Make the selection based on whether you are connecting the unit to a PAL TV or an NTSC TV. You can also set the unit to AUTO (auto select).
Basic Operation VIDEO SETUP AUDIO SETUP Touch the audio to turn to audio quality adjustment. AUDIO BASS TREBLE SUBWOOFER COLOR 20 BRIGHTNESS 20 CONTRAST 20 TINT 20 ... EQ USER Video setup interface audio setup interface1 COLOR: 0 to 40 Adjust the color for the picture-lighter or darker. AUDIO LOUDNESS OFF FADER/BALANCE ... BRIGHTNESS: 0 to 40 Adjust if the picture is too bright or too dark. audio setup interface2 CONTRAST: 0 to 40 Adjust the contrast of the bright and dark portion.
Basic Operation Reset Factory Settings RESET button is placed on the housing and must be activated with either a ballpoint pen or thin metal object. The RESET button is to be activated for the following reasons: A. Initial installation of the unit when all wiring is completed. B. All the function buttons do not operate. C. Error symbol on the display. RE SE T RESET NOTE: If RESET is selected, all memory data will deleted, please re-adjust .
Control Panel UNIT KEYS 11 7 16 + MI C TA/AF MU /P TY _ PAIR BN D 8 10 11 17 3 9 13 18 12 15 5 1 2 Control Panel RE SE T 6 14 Sliding Plate diagram after remo ving Control Panel 1. AUX IN JACK 10. MUTE or PTY BUTTON 2. USB IN PORT and COVER 11. PAIR or BAND BUTTON 3. SEL BUTTON and VOL KNOB 12. >|| or CH1-6 BUTTON 4. REL BUTTON 13. 5. IR SENSOR WINDOW 14. CARD SLOT 6. RESET BUTTON 15. LCD SREEN 7. EJECT BUTTON 16. OPEN or 8. POWER or MODE BUTTON 17. TA or AF BUTTON 9.
Control Panel Same functions in any work source 1. POWER/MODE button In power off mode, pressing POWER/MODE button on remote control or pressing POWER/MODE button on control panel powers on main unit. In power on mode, long pressing POWER/MODE button on control panel or on remote control or touch icon on source menu powers off main unit.
Touch Screen Operation RADIO OPERATION Briefly touch “ ” to decrease frequency by one step of channel spacing. Listening to Radio Touch the RADIO ICON in home menu to enter the RADIO mode. In radio mode, tap icon that the display turn dark, tap twice turn dark more, tap thrice to turn off the display, and tap anywhere of the display to turn it on again. Automatic Search During Radio mode, touch and hold (for more than 2 seconds ) either “ / ” ICONS to start search for a radio station automatically.
Touch Screen Operation Automatic Memory Storing & Program Scanning Automatic Preset Setup In Radio Mode, touch and keep (for more than 2 ’ S) the screen of “ ” range to active automatic station storage. The radio searches within the current frequency band, e.g. FM 3 , for the stronger signal level until the search cycle has finished . The six strongest stations are then allocated to the corresponding storage locations . Then the station of the first storage location is set .
Touch Screen Operation PI MUTE : the sound of another station is suppressed . TA Traffic Announcement Touch the AF section on touch screen or swing and keep the SEL knob in the TA/AF direction for about 2 seconds , the AF function is activated. The AF symbol appears in the display . (Priority For Traffic Information) In Radio mode, touch the cursor button to switch the TA function ON and OFF . When the TA function is activated, the TA symbol appears in the display .
Touch Screen Operation Media Operation To skip the next track In audio play mode, the message will display as below : (When Parking Brake is applied .) To skip the previous track Repeat Function Random Function Previous menu Tap to turn to BT PHONE mode. (after pairing and connecting a mobile phone with BT function). In audio play mode, tap icon that the display turn dark,tap twice turn dark more, tap thrice to turn off the display, and tap anywhere of the display to turn it on again.
Touch Screen Operation BASIC OPERATION Note: when the JPEG disc playback, in normal mode, you can use the cursor buttons to rotate the picture . Press UP to invert an image . Press DOWN to mirror an image . Press LEFT to rotate an image to left . Press RIGHT to rotate an image to right . Pause (still picture) Touch the “ ” section on touch screen during playback will stop play temporary, touch it again to return the normal playback .
Touch Screen Operation FOR VCD : T 001/004 C 001/001 MENU Press the INT button on the remote control. It display will following menu as below : SE Q PL AY INTR O 1 00:25:08 Note: when select the INTRO Mode, this player to start to play the previous 15 seconds part of each track/chapter on disc. (Touch it again to cancel this mode .) 01:03:02 2.
Touch Screen Operation Touch the to select the your adjustment item, then select the item your favour by touching the numberic buttons , then touch the OK button to confirm . FOR VCD (With PBC OFF) : Touch the screen as show or press the GOTO button on remote control; T 001/004 PBC MIX the screen will display the following message : Touch the to select the your adjustment item, then select the item your favour by touching the numberic buttons , then touch the OK button to confirm .
Touch Screen Operation Digital Video Special Function 1. Multi-subtitle Language Function (for Digital Video Only) 3. Multi-Angle Function (for Digital Video Only) During Digital Video playback. Touch the icon on touch screen(or press the SUBT on the remote) . Each time the button is pressed or touch, number of the subtitle language changes in sequential order. Notes: - The language number is different according to the disc. During Digital Video playback, touch the icon on the touch screen .
Touch Screen Operation BT Operation 1.
Touch Screen Operation Tap a icon such as to show as follow: : Tap to download the contacts from your phone. CONTACTS : Tap for phone number search. & : For page turning. b. Use the number icons or buttons to input your desired phone number; * When inputting a wrong digit, use c. After finishing inputting, touch to dial out. icon or < button to delete it.
Touch Screen Operation 3 . BT MUSIC 1 ) Touch BT MUSIC in home menu or pressing MODE button can pop up BT MUSIC interface as follows: Mute function Play/Pause the playing To select the Equalizer mode To skip the next track To decrease the volume level To skip the previous track To increase the volume level Tap to turn to BT PHONE mode. Loudness Function (After pairing and connecting a phone with BT function).
Touch Screen Operation AUX Operation On the front panel of this unit, there is an AUX IN jack, follow the diagram below to connect analogue replay devices(only for the Audio connect, if you want to connect the Video, please plug the
Touch Screen Operation AV Operation Please plug the
Touch Screen Operation USB OPERATION Card OPERATION Following the diagram below, connect your USB device to the front panel USB port . If it is properly connected, the device will be mounted and start playing automatically. The unit can support playback MP3/WMA/ JPEG/MP4 and Divx format which are stored on SD memory cards . Please read the following instructions before you start using a memory card .
Touch Screen Operation STEERING WHEEL CONTROL Touch the SWC icon as follow to turn to steering wheel control . Then tap Assign and tap the button 1 and then select the icon as the picture show, the icon show in button 1 position. After selection tap confirm and back to home menu that means select finish. The function of the icons as follow: Touch to begin function save. After selection touch to confirm operation. During setting, touch the turn to home menu.
Specification General Power Supply Requirement..................................................DC 12V Current consumption........................................................10A MAX. Audio Signal Output ............................................................ 2ch&4ch line out Frequency Response................................................... 20 Hz - 20 KHz S/N Ratio ........................................................................... 90 dB (JIS) Wow and Flutter ............................
Troubleshooting Before going through the check list, check wiring connection. If any of the problems persist after check list has been made, consult your nearest service dealer. SYMPTOM No power CAUSE SOLUTION The car ignition switch is not on The fuse is blown If the power supply is properly connected to the car accessory terminal,switch the ignition key to "ACC" Replace the fuse Presence of disc inside the Remove the disc in the player, then put a new one player.
