Operation Manual

20
XOMAX
XM-DVB3007
DE
Topic:
Startup operations
Insert a micro SD card
Insert a micro SD card into the slot with
the label side to the right and the pin
side to the left. Make sure that the card
is intact and dirt-free.
Insert a USB flash drive
Insert an USB ash drive proper into a
USB plug. Do not insert any heavy or
big USB ash drives in order not to hit it
accidently - it could cause damages of
the USB plug or USB ash drive.
Insert a CD/DVD
Insert a valid CD or DVD with the mirror
surface downwards, the disc slides in
and the playback starts automatically.
Ensure that the disc has no scratches,
soilings etc.
Micro SD cards and USB ash
drives should have following le-
system format: FAT32 or exFat. Other
types will not be supported.
i
Unit on/off
Press the ? button to turn the unit
on.
If the unit is already on, keep the ?
button pressed for a couple of seconds
to turn it down.
AUX input
The AUX input is a 3,5 mm jack plug on
the front operating panel.
Herewith you can connect the unit with
on of the external playback devices:
MP3 player, smartphone, cellphone or
tablet PC.
An adapter cable 3,5 mm jack-to-jack
will be required.
Press the corresponding button to
switch between various modes several
times till the AUX mode appears on the
display.
If the external device is connected with
the unit, the playback is audible via car
radio loudspeakers.
The playback control can be achieved
via external device only.
Factory settings
Press SETUP on the remote, then use
the arrow key ” and choose DEFAULT
. Now press ENTER , the unit will be
reset back to factory settings. Leave
the menu pressing SETUP again.