XOMAX Users Manual XM-VRSU310BT ENGLISH
Users Manual XOMAX XM-VRSU310BT Thank you for purchasing one of our XOMAX products! We appreciate your confidence. Enjoy your brand new multimedia unit! i Please read the following manual carefully before you install and use the unit. Please save this manual in case you will need to clarify further possible questions regarding installation and usage of our product. We are constantly trying to keep our online-library of user's manuals for our products up-to-date.
Topic: List of contents DE List of contents List of contents 3 Unit on/off.....................................18 AUX input......................................18 Insert a micro SD card....................18 Safety instructions and precautions 5 Introduction 7 Insert a USB flash drive...................18 Basic functions Mode choice...................................19 Description..................................... 7 Mode choice menu..........................19 Specifications..............
Topic: List of contents DE LOC signal sensitivity......................25 Picture viewer interface...................31 RDS functions................................25 Slide show play/pause.....................31 PTY function (Programme Type)..............25 Zoom in / out.................................31 TA function (Traffic Announcement)...........25 Rotate / mirror the picture...............31 AF function (Alternative Frequency)..........25 Next / previous picture....................
Topic: Safety instructions and precautions tions to professional technicians. Safety instructions and precautions ! Due to flawed warranty seal the warranty becomes invalid. ! Handling by stop only ! Power supply To avoid any accidents please don't handle the unit while you driving. Please stop and park the vehicle at safety place and handle the unit casually. ! Use the unit connected only to 12 Volt on-board power supply. The minus (-) should be connected with the ground (GND) (negative).
Topic: ! Safety instructions and precautions DE Cleaning of the unit Please keep the unit clean and remove the dust from it regularly. Please use for that a soft and dry cleaning rag. Major soilings can be removed carefully with the wet cleaning rag. Do not use any chemical or alcohol-containing detergents to avoid the damage of the unit's varnish.
Topic: Introduction DE Introduction Specifications Common data Description Operating voltage ............................. 12V DC The XOMAX XM-RSU310BT is a FlashXO 1DIN-sized multimedia car radio. Backlight color ................ Multicolor (7 colors) A FlashXO car radio is a contemporary multimedia system without optical CD/DVD drive, also called mechless car radio. Music and audiobooks can be played via USB flash drive or SD-/ SDHC-/SDXC-cards. Audio Instalation size .........
Topic: Introduction DE Package content i Please note: the package content may vary due to technical updates. Please check the accessories on completeness. A C D E B F G The images serve as example. Optically the may vary from the original.
Topic: Introduction DE Operating elements Functions 4 MUTE Mute On/Off. 1 /SRC/U [Device on/off] Press the power button to turn 5 BND/ [BAND] in radio mode: to switch between the unit on. Keep it pressed for ca. 2 seconds to turn it down. frequency bands: FM1, FM2, FM3, AM1 and AM2 [SOURCE] If the unit is on, press this button [Telephone] to accept/start a call. to switch between diverse modes: Radio, AUX, 6 AMS/MEDIA [AMS] long press Starts the automatic Bluetooth, USB, SD.
Topic: Introduction DE brief press Audio settings 9 3/RPT Repeat/stored radio stations Press the button several times to switch [Playback] repeat between following options: AUTO (LED lights [Radio] Stored station "3" settings), Bass, Treble, Balance, Fader, Loudness, Equalizer, Stereo and Volume. A 4/RDM Random/stored radio stations Within the selected option rotate the button to maximaze/minimize corresponding factor.
Topic: Introduction DE 9. Remote control LOC/RDM [Radio] local broadcasting stations [Playback] random play 10. 8 [Playback] previous track [Radio] stations searching back 11. PBC PBC function 12. OSD To display the current information 13. 0-9 Numeric pad [Radio] Presets 1-6 [Playback] track selection 1-9 14. ^ Mute on / off 15. Play/Pause 16. SUB-T to switch subtitles 17. TITLE to call up a DVD title menu 18. SETUP to call up a setup menu 19. SLOW slow motion (video) 1. 2. PWR 20.
Topic: Installation DE »» Make sure that your vehicle is equipped with a car radio slot of required size (1 or 2DIN) Installation Installation notes »» As may be the case you will need a suitable faceplate, adapter or other accessories. These could be provided from your local specialist supplier. Here you can find relevant installation notes and common information. i The detailed installation manual you can find on our homepage www. xomax.de.
Topic: Installation DE other devices please ensure that both of the cables in each case have the same purpose. To connect everything correctly please refer to the manuals of the both devices. through the engine bay in order to connect it with the vehicle battery. »» Do not ever connect speaker cables among one another. In case you do not want to connect all the 4 speakers with the unit please isolate the endings of unused cables with the electrical tape to prevent a short circuit.
Topic: Connection schedule – cinch DE B A 10 Connection schedule – cinch + rear view camera (optional) e.g. headrest- or ceiling display external display (optional) rear left front left front right e.g.
Topic: Connection schedule – ISO plug / socket DE Connection schedule – ISO plug / socket 10 B A B 1 3 2 4 26 5 6 77 88 13 5 7 2 4 6 8 1 2 A 3 55 4 6 7 8 1 3 5 7 2 4 6 8 A8 A7 A5 A4 A3 12V - A1 + + + + XOMAX + rear left - front left front right rear right 15 - XM-VRSU310BT
Topic: ISO plug / socket pin assignment DE ISO plug / socket pin assignment A 2 4 6 8 1 3 5 7 2 4 6 8 1 3 5 7 B Port B (loud speakers) Port A (power supply) On the A side you can find the port for power supply. On the B side you can find the speakers terminals.
Topic: Startup operations DE Replacement instructions: Startup operations Usage of the remote control Before the first usage please remove the isolation plate. 1. Remove the battery compartment: push it to the left first, then pull it out. Aim the remote control at the IR receiver on the front operating panel. The IR receiver should not be blocked. 2. Remove the old battery and insert the new one (CR-2025 Lithium). As soon as the remote control does not work proper the battery should be replaced.
Topic: Startup operations DE Unit on/off Insert a micro SD card Press the ? button to turn the unit on. Insert a micro SD card into the slot with the label side to the right and the pin side to the left. If the unit is already on, keep the ? button pressed for a couple of seconds to turn it down. Make sure that the card is intact and dirt-free. AUX input The AUX input is a 3,5 mm jack plug on the front operating panel.
Topic: Basic functions DE Basic functions 1. Bass settings* (prompt "BAS" on the screen) Mode choice 2. Treble settings* (prompt "TRE" on the screen) 3. Balance settings (prompt "BAL" on the screen) Press the /SRC/U button on the front panel or the MOD button on the remote control to switch between the modes: Radio, AUX, USB and SD. 4. Fade settings (prompt "FAD" on the screen) 5. Loudness on/off (prompt "LOUOF " on the screen) Mode choice menu 6.
Topic: Basic functions DE control till the prompt "AUTO" appears on the screen. Then rotate the button to switch between 7 diverse colors. You can also use for that the button VOL- / VOL+ on the remote control. Preset Equalizer The EQ preset offers a few factory stored frequency settings, depending on the musical genre of the current playback: Pop, Rock and Classic or EQOFF (EQ preset off). To switch between presets press the EQ button on the front panel / remote control.
Topic: Basic functions DE confirm you adjustments pressing Rotary button or SEL . Repeat these steps to define GREEN and BLUE. OSD Press the OSD button on the remote control to call up the current information such as track number, time running, time left etc. Settings To enter the Settings Menu press the SETUP button on the remote control. Here you can make your adjustments regarding audio playback, time, date etc.
Topic: Storage media DE Audio Storage media »» MP3 files (with ID3-support) »» WMA audio format Supported storage media Images »» USB flash drives max. capacity: 32 GB file system: FAT32 or exFat only »» JPEG i Please note that some files can have diverse characteristics (codings, resolutions). It may lead to disfunctions during the playback. »» Micro SD-, Micro SDHC- and Micro SDXC-cards max.
Topic: Storage media DE Video format - Best practise ID3 tag (song/interpreter/album) Possible playback problems could be solved using following coding settings, whereby these are only an example: The "ID3 tag" function allows to view the additional track information, e.g. name of the current song/of an artist/of an album. Case. 1 This function is available only during the MP3 files playback; the tags should be stored in these files first.
Topic: Radio mode DE After ca. 5 seconds of inactivity the unit switchs back to automatic station searching mode. Radio mode Radio interface Store the found stations current frequency band current frequency and station name (RDS) There are 6 memory cells per FM frequency band. To store the current radio station keep pressed the corresponding button (M1-M6) on the remote control for ca. 2 seconds.
Topic: Radio mode DE AMS Automatic frequency scan RDS functions Press the AMS button to start the automatic frequency scan. Please note: the provided RDS functions (AF, TA and PTY) in some countries may be unavailable. The unit searches automatically for the radio stations with the strongest signal and stores them in the memory cells 1-6 per frequency band. PTY function The Programme Type function allows to search for a station according to it's type (e.g. music or education).
Topic: Radio mode EON function DE (Enhanced Other Networks) The Enhanced Other Networks function allows the reception of the traffic announcements from the stations as well, that usually do not offer any. As in case in every other RDS function: first press the Rotary button or SEL on the remote control several times till the required prompt appears. Then rotate the button or use VOL- / VOL+ to (de-)activate the function.
Topic: USB and SD mode DE USB and SD mode Choose the file Use the arrow keys on the remote control or the 8 / 7 (switches between file type and file selection) and Rotary Button (scrolls through the list). To confirm your choice press the button ENTER or Rotary Button . Start the playback As soon as you plug / insert a valid USB flash drive / SD card the unit switches to the playback mode automatically.
Topic: Music playback DE Music playback Intro function When this function is activated all the available tracks will be played only for the first their 10 seconds. Music playback interface ID3 tag display OSD information The 2/INT button on the front panel (de-)activates this function.
Topic: Video playback DE There are 4 grades of slow motions: 1/2 1/3 1/4 1/5. Each pressing of the SLOW button on the remote control leads to the next grade.
Topic: Video playback DE Switch the subtitles If there are any subtitles on the DVD available you can switch between them using the SUB-T button on the remote control. Only the *.SRT files are supported. OSD inforamtion To view the OSD information press the OSD button on the remote control. Press it again to hide it.
Topic: Picture viewer DE Picture viewer OSD information To view the OSD information press the OSD button. To hide it press the button again. Picture viewer interface file number OSD Information Image information Slide show play/pause To pause/resume the slide show press the < button. Zoom in / out Press the ZOOM button to activate the zoom mode.
Topic: Audio/Video input DE Audio/Video input Bluetooth connection Before the first usage of any Bluetooth function the unit should be connected via Bluetooth with the device of your choice. AUX input The AUX input is a 3,5 mm jack plug on the front operating panel. A Activate the Bluetooth function on Herewith you can connect the unit with on of the external playback devices: MP3 player, smartphone, cellphone or tablet PC. the external device (e.g. cellphone).
Topic: Hand-free phone call DE Hand-free phone call End / reject a call To end the active call or to reject the incoming call press the /SRC/U button on the front panel. Common information This unit contains a Bluetooth feature "hand-free phone call" which allows to make your phone calls hand-free via integrated microphone and loudspeakers. Phone book As soon as you switch to BT mode the phone book appears on the screen. Your contact data has to be exported first from your mobile phone.
Topic: Setup DE Setup Settings menu To enter the settings menu press the SETUP button on the remote control. To step through the menu use the arrow keys on the remote control. OSD language Set up the language of OSD menu: english / chinese Area Set up the region: USA1, Europa, USA2 Audio Parameters: Bass, Treble, Balance, Fade, Loudness Video Parameters: Brightness, Contrast, Hue, Saturation, Sharpness. Time Parameters: Year, Month, Day, Hours, Minutes.
Topic: Common solutions DE Common solutions The following advices are generally valid and refer to diverse Xomax models with the similar characteristics. Please note that some articles may refer not to your model exactly and may contain the describtion of features and functions that your model does not support. Describtion of the problem Cause and solution The remote control is without function. Solution 1: Please ensure that the battery film is removed.
Topic: Common solutions Poor radio reception: The radio tuner finds no broadcaster or the reception is poor. DE For problem-solving regarding the radio reception it is important to know the type of the antenna of your vehicle. Here are the possible solutions for each type of the antenna: Type 1 – passive antenna: We recommend you to substitude the existing antenna by the larger and therefore more efficient one. Shark fin or rod antennas (under 5 cm) are definitely insufficient.
Topic: Disposal/recycling information DE Disposal/recycling information According to the battery decree we make you aware of your obligation to dispose of empty batteries at municipal collection points. Disposal of an old unit / battery User information regarding disposal of Batteries that contain pollutants (e.g. Hg = mercury, Pb = lead, Cd = cadmium) are labelled with the symbol pictured above.
