XOMAX Installation Manual XM-VRSU313BT Installation Manual ENGLISH
Topic: EN ENGLISH Installation Manual XM-VRSU313BT Thank you for purchasing one of our Xomax products! We appreciate your confidence. Enjoy your brand new multimedia unit! i Please read the following manual carefully before you install and use the unit. Please save this manual in case you will need to clarify further possible questions regarding installation and usage of our product. We recommend you to let the technician install the unit in your vehicle.
Topic: EN Safety instructions and precautions 4 Connection schedule – ISO plug 15 Handling by stop only....................... 4 ISO plug configuration Installation..................................... 4 Regular loudness............................. 4 16 Socket A (power supply)..................16 Repair of the unit............................ 4 Socket B (loud speakers).................16 Power supply.................................. 4 Replacement of fuses....................... 4 Overheating...
EN Topic: Safety instructions and precautions Safety instructions and precautions ! Handling by stop only To avoid any accidents please don't handle the unit while you driving. Please stop and park the vehicle at safety place and handle the unit casually. ! Installation Please read the following manual carefully before you install the unit. We recommend you to let the technician install the unit in your vehicle.
Topic: ! Safety instructions and precautions EN Cleaning of the unit Please keep the unit clean and remove the dust from it regularly. Please use for that a soft and dry cleaning rag. Major soilings can be removed carefully with the wet cleaning rag. Do not use any chemical or alcohol-containing detergents to avoid the damage of the unit's varnish. ! Usage of the touchscreen Do not press the touchscreen too hard – it may lead to image distortions, unit malfunctions and touchscreen damages.
EN Topic: Installation Installation ! We recommend you to let a professional technician install the unit in your vehicle. ! WARNING! Please read these advices carefully »» Before the installation please make sure that the vehicle has the 12 Volt on-board power supply. »» The minus (-) should be connected with the ground (GND) (negative). »» Please tag the polarity of the available speakers before you disconnect the vehicle battery. before installation procedure.
Topic: Installation EN speaker cable is in each case plugged into the negative speaker socket of the ISO interface. Do not ever connect the negative speaker cables with the vehicle body. through the engine bay in order to connect it with the vehicle battery. »» Do not ever connect speaker cables among one another. In case you do not want to connect all the 4 speakers with the unit please isolate the endings of unused cables with the electrical tape to prevent a short circuit.
EN Topic: Installation instructions Installation instructions 1 1 2 1 Installation steps 1. fixture accessories (optional): 1 x fixation metal sheet, 1 x bolt, 1 x nut, 1 x washer 2. installation frame 3 4 3. dual-ended bolt 4. unit * Installation frame is already firmly fixed to the unit's housing by delivery. 2 dual-ended bolt 2 Fixture of the fixation sheet This step can not be accomplished in every vehicle, thus it may be possibly skipped.
Topic: Installation instructions EN 3 Please insert the installation frame in the installation cell (car radio slot). Then bend all the cogs outwards to fixate the frame inside the cell (slot). 3 Fixture of the installation frame Please remove first the installation frame (if it's included in delivery) from the unit. Please use for that the extraction keys (see page 11). Possibly the faceplate should be removed as well.
EN Topic: Installation instructions 5 fixation metal sheet fixation bolt fixation nut 5 Fixture of the unit This procedure refers to the step 2 and may be possibly skipped as well. As earlier required (see page 9), the dual-ended bolt of the unit should be pulled through one of the holes in the XOMAX fixation metal sheet. Now the unit should be fixated to the metal sheet with the washer and the nut.
Topic: Deinstallation instructions EN Deinstallation instructions 1 to release the unit from the installation frame. 1 Prepair the instruments To deinstall the unit you will need a spanner (a wrench) to unloose the fixation nut and 2 extraction keys (optional) 2 unloose the fixation nut This step may be possibly skipped, if due to the lack of space the unit initially was not fixated to the fixation metal sheet.
EN Topic: Deinstallation instructions 3 extraction keys 3 Use the extraction keys Please insert the extraction keys into the dedicated recesses between the installation frame and the unit's housing. In each case the key should be inserted centered, the inserting point should be equally distanced both from the top and from the bottom. 4 unlocking holding side-cogs 4 Unloose the unit released from the installation frame and can be carefully pulled out.
Topic: Deinstallation instructions EN 5 Afterwards please disconnect all the cables incl. the ISO multicore. 6 Remove the unit Now pull the unit carefully out of the installation frame or out of the car radio slot in case the frame was already firmly fixed to the unit by delivery. 6 5 Remove the installation accessories Finally remove all the installation accessories such as fixation metal sheet and installation frame.
EN Topic: Connection schedule – Cinch multicore Connection schedule – Cinch multicore XOMAX 14 XM-VRSU313BT
Topic: Connection schedule – ISO plug EN Connection schedule – ISO plug XOMAX 15 XM-VRSU313BT
EN Topic: ISO plug configuration ISO plug configuration A 2 4 6 8 1 3 5 7 2 4 6 8 Socket A (power supply) 1 3 5 7 B Socket B (loud speakers) On the A side you can find the socket for power supply. On the B side you can find the speakers terminals.
Topic: ISO cable connections EN ISO cable connections 2 1 2 3 1 Terminal plug ! We recommend you to let a professional technician install the unit in your vehicle. This plug connects the ISO cable with the unit. 2 Fuses 3 ISO plug This plug connects the ISO cable with the vehicle. The ISO cable as such serves as an extension cable for an eased connection of the unit to the vehicle provided that the vehicle has a standardized ISO plug with the appropriate pin assignment.
EN Topic: Common solutions Common solutions The following advices are generally valid and refer to diverse Xomax models with the similar characteristics. Please note that some articles may refer not to your model exactly and contain the describtion of features and functions that your model does not support. The describtion of the problem The cause and the solution The remote control is without function. Solution 1: Please ensure that the battery film is removed.
Topic: Common solutions Poor radio reception: The radio tuner finds no broadcaster or the reception is poor. EN For problem-solving regarding the radio reception it is important to know the type of the antenna of your vehicle. Here are the possible solutions for each type of the antenna: Type 1 – passive antenna (see page 33 – wiring diagram): We recommend you to substitude the existing antenna by the larger and therefore more efficient one.
EN Topic: Recycling of an old unit/Recycling of the battery Recycling of an old unit User information regarding recycling of electric and electronic devices (private households) Recycling of the battery According to the battery decree we make you aware of your obligation to dispose of empty batteries at municipal collection points. Batteries that contain pollutants (e.g. Hg = mercury, Pb = lead, Cd = cadmium) are labelled with the symbol pictured above.
