XOMAX Users Manual XM-VRSU411 USB Micro SD XC FM RADI O Version 2.
XOMAX XM-VRSU411 Thank you for purchasing one of our XOMAX products! We appreciate your confidence. Enjoy your brand new multimedia unit! i Please read the following manual carefully before you install and use the unit. Please save this manual in case you will need to clarify further possible questions regarding installation and usage of our product. We are constantly trying to keep our online-library of user's manuals for our products up-to-date.
Topic: List of contents DE List of contents Safety instructions and precautions 5 Basic functions 19 Mode choice...................................19 Loudness.......................................19 Introduction 7 Settings........................................19 Preset Equalizer.............................20 Description..................................... 7 Loudness.......................................20 Specifications.................................. 7 Mute.............................
Topic: List of contents DE Play / Pause...................................24 Skip track for-/backwards................24 Rewind / fast-forward......................24 Video file manager..........................24 Picture viewer 25 Slide show play / pause...................25 Skip image for-/backwards..............25 Picture viewer manager...................25 Common solutions 26 Disposal / recycling information 28 Disposal of an old unit.....................28 Disposal of the battery..............
Topic: Safety instructions and precautions tions to professional technicians. Safety instructions and precautions ! Due to flawed warranty seal the warranty becomes invalid. ! Handling by stop only ! Power supply To avoid any accidents please don't handle the unit while you driving. Please stop and park the vehicle at safety place and handle the unit casually. ! Use the unit connected only to 12 Volt on-board power supply. The minus (-) should be connected with the ground (GND) (negative).
Topic: ! Safety instructions and precautions DE Cleaning of the unit Please keep the unit clean and remove the dust from it regularly. Please use for that a soft and dry cleaning rag. Major soilings can be removed carefully with the wet cleaning rag. Do not use any chemical or alcohol-containing detergents to avoid the damage of the unit's varnish.
Topic: Introduction DE Display Introduction Display type ..................... Dot Matrix Display Diagonal ........................... 10,16 cm / 4 inch Description FM tuner The XOMAX XM-VRSU411 is a flash XO 1DIN-sized multimedia car radio. Frequency range.................... 87.5 - 108 MHz FM sensibility ...................................... 10 dB S/N ratio.............................................
Topic: Introduction DE Please check the accessories on completeness. Package content 1 car radio 2 remote control with battery 3 installation manual 4 1DIN installation frame (on unit) 5 mounting material 6 ISO port adapter cable i Please note: the package content may vary due to technical updates. 3 1 2 4 6 5 The images serve as example. Optically the may vary from the original.
Topic: Introduction DE Operating elements 1 2 BC 1 3 45 6 D E FG 3 BAND/AMS Radioband/Automatic 6 Display 7 MUTE Mute on/off 8 MENU/CLK Main menu/Clock settings briefly press Main menu settings frequency scan [in radio mode]: briefly press to switch between frequency bands: FM1, FM2, FM3, AM1 and AM2 long press Clock settings long press starts the automatic frequency scan and stores the found radio stations (in Radio mode).
Topic: Introduction C AUX Auxiliary audio input D VOL- reduces the loudness E CH- Previous radio station F USB/SD switch between USB mode G AV switch between audio, video and DE 3,5 mm jack plug for connection with an external playback device such as MP3 player, smarthone, tablet PC etc. and SD mode image modes [im playback mode]: switch between audio, video and image formats on the current disk.
Topic: Introduction DE Remote control [BAND] brief press switch the 1 2 3 4 5 6 VOL 7 8 9 VOL 10- 0 10+ frequency band: FM1, FM2, FM3, AM1 und AM2 12. +10 10 tracks skip forth 13. CH+ switch radio presets forth 14. CH+ MUTE MODE CH- step to the right or down 15. 8 confirm the entry 8 A/V u INT 16. INT Intro function (each track plays only the first 10 APS BAND seconds) 1. ? car radio on / off 17. CH- switch radio presets back 2. 1-0 numeric pad 18.
Topic: Installation DE »» Make sure that your vehicle is equipped with a car radio slot of required size (1DIN) Installation Installation notes »» As may be the case you will need a suitable faceplate, adapter or other accessories. These could be provided from your local specialist supplier. Here you can find relevant installation notes and common information. i The detailed installation manual you can find on our homepage: www.xomax.de. »» The connection cables may not be cutted or short-circuited.
Topic: Installation DE other devices please ensure that both of the cables in each case have the same purpose. To connect everything correctly please refer to the manuals of the both devices. through the engine bay in order to connect it with the vehicle battery. »» Do not ever connect speaker cables among one another. In case you do not want to connect all the 4 speakers with the unit please isolate the endings of unused cables with the electrical tape to prevent a short circuit.
Topic: Connection schedule – cinch DE 10 Connection schedule – cinch rear left e.g. (optional) front left front right rear right radio-aerial passiv loud speakers rear view camera (optional) e.g.
Topic: Connection schedule – ISO plug / socket DE Connection schedule – ISO plug / socket A phantom power 1 3 5 7 2 4 6 8 1 35 7 24 68 1357 2468 radio aerial active A4 A5 A7 A8 permanent current ignition + B 1 3 5 7 2 4 6 8 ISO-plug/socket B A rear right + front right + front left + rear left + - 15 - XOMAX Loudspeaker 12V XM-VRSU411
Topic: ISO plug / socket pin assignment DE ISO plug / socket pin assignment A 2 4 6 8 1 3 5 7 2 4 6 8 Port A (power supply) 1 3 5 7 B Port B (loud speakers) On the A side you can find the port for power supply. On the B side you can find the speakers terminals.
Topic: Startup operations DE Replacement instructions: Startup operations Usage of the remote control Before the first usage please remove the isolation plate. 1. Remove the battery compartment: push it to the left first, then pull it out. Aim the remote control at the IR receiver on the front operating panel. The IR receiver should not be blocked. 2. Remove the old battery and insert the new one (CR-2025 Lithium). As soon as the remote control does not work proper the battery should be replaced.
Topic: Startup operations DE Unit on/off Insert a micro SD card Press the ? button to turn the unit on. Insert a micro SD card into the slot with the label side to the right and the pin side to the left. Make sure that the card is intact and dirt-free. If the unit is already on, keep the ? button pressed for a couple of seconds to turn it down. Insert a USB flash drive AUX input Insert an USB flash drive proper into a USB plug.
Topic: Basic functions DE Basic functions (ca. 2 seconds long) several times to switch between following settings: Mode choice 1. TA function on/off (prompt "Adjust TA" on the screen) Press the ?/MOD button on the front panel or the MOD button on the remote control to switch between the modes: Radio, AUX, USB and SD. 2. AF function on/off (prompt "Adjust AF " on the screen) 3.
Topic: Basic functions DE Here are the available colors: Preset Equalizer The EQ preset offers a few factory stored frequency settings, depending on the musical genre of the current playback: Pop, Rock and Classic or EQOFF (EQ preset off). To switch between presets press the EQ button on the front panel / remote control. Loudness The "Loudness" function boosts BASS and TREBLE frequencies to achieve more voluminous sound. To activate this function: 1.
Topic: Radio mode DE glows blue. Radio mode If the station has been successfully saved, the frequency of the radio station appears on the display next to the number of memory slots. Radio mode on To get to Radio mode press the ? /MOD button several times till you see the prompt "Radio" on the display. AMS Automatic frequency scan Press the BND/AMS/OSD button on the front panel for ca. 2 seconds to start the automatic frequency scan.
Topic: Radio mode PTY function DE (Programme Type) i We recommend you to deactivate this function in-city. Otherwise the searching starts each time you drive through the tunnel. The Programme Type function allows to search for a station according to it's type (e.g. music or education). TA function (Traffic Announcement) While this function is activated the unit switches automatically to the radio mode for the current traffic announcement. After the announcement it switches back to the initial mode.
Topic: Playback mode DE Playback mode Rewind / fast-forward Hold the 8 / 7 button pressed till you get to the required passage. Then release the button, the playback resumes. Switch to playback mode As soon as you either plug an USB flash drive or insert a micro SD card the unit's processor reads the data from the storage medium and the unit switches to playback mode.
Topic: Video playback DE Video playback button on the remote. Play / Pause As soon as you insert the valid USB or SD storage medium the unit switches automatically to the playback mode: Audio, Video or Slide Show To switch to playback mode manually keep pressed the AV button for ca. 2 seconds till the Video playback interface appears on the screen. The playback can be paused/resumed via < button on the remote control.
Topic: Picture viewer DE Picture viewer the CH- / CH+ buttons on the remote. Slide show play / pause Confirm your entries pressing the SEL button on the front panel or the 8 button on the remote. As soon as you insert the valid USB or SD storage medium the unit switches automatically to the playback mode: Audio, Video or Slide Show To switch to playback mode manually keep pressed the AV button till the Video playback interface appears on the screen.
Topic: Common solutions DE Common solutions The following advices are generally valid and refer to diverse Xomax models with the similar characteristics. Please note that some articles may refer not to your model exactly and may contain the describtion of features and functions that your model does not support. Describtion of the problem Cause and solution The remote control is without function. Solution 1: Please ensure that the battery film is removed.
Topic: Common solutions Poor radio reception: The radio tuner finds no broadcaster or the reception is poor. DE For problem-solving regarding the radio reception it is important to know the type of the antenna of your vehicle. Here are the possible solutions for each type of the antenna: Type 1 – passive antenna: We recommend you to substitude the existing antenna by the larger and therefore more efficient one. Shark fin or rod antennas (under 5 cm) are definitely insufficient.
Topic: Disposal / recycling information DE Disposal / recycling information Disposal of an old unit Disposal of the battery User information regarding disposal of electric and electronic devices (private households). According to the battery decree we make you aware of your obligation to dispose of empty batteries at municipal collection points. Batteries that contain pollutants (e.g. Hg = mercury, Pb = lead, Cd = cadmium) are labelled with the symbol pictured above.
