XM-VRSU713BT INSTALLATION MANUAL CAR AUDIO/VIDEO SYSTEM 7 Inch Million Multi-color Illumination TFT Touch Screen FLIP DOWN AND DETACHABLE CONTROL PANEL Remote Control Digital Video Disc Player Control Panel USB Port and AUX Input Memory Card Slot AM/FM-RDS Digital PLL Tuning Radio BT Compatible
To ensure safety while driving and to comply with laws, drivers should not watch video or operate the video device while driving.
Precaution THANK YOU FOR PURCHASING A SOUNDSTORM MULTIMEDIA PLAYER . Before operating the unit, read this manual thoroughly and keep it handy for future reference . To avoid injury or accident , read the following precautions before installing and operating the unit . ON INSTALLATION DO NOT install any receiver in locations where; - it may obstruct the steering wheel and gearshift lever operations, as this may result in a traffic accident.
Installation NOTES: Choose the mounting location where the unit will not interfere with the normal driving function of the driver. Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly. Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions.
Installation Installation diagram DASH BOARD HEX NUT METAL MOUNTING STRAP SPRING WASHER PLAIN WASHER CONSOLE TAPPING SCREW HEX BOLT MOUNTING BRACKET PLASTIC FRAME MOUNTING BOLTS MOUNTING BRACKET -3-
Electric Connection WIRING CONNECTION AV IN RADIO ANTENNA JACK White Yellow Red Yellow LCH IN WHITE VIDEO IN YELLOW RCH IN RED FRONT RCA AUDIO OUT SOCKET FRONT RCA AUDIO OUT SOCKET VIDEO OUTPUT SOCKET ISO CONNECTOR VIDEO OUTPUT SOCKET REAR CAMERA INPUT YELLOW SUBWOOFER GREY KEY GROUND(BLACK) KEY 1(BROWN) KEY 2(WHITE/ORANGE) FUSE RED IGNITION SWITCH(B+) MEMORY BACK-UP(B+) PINK YELLOW GROUND(B-) AUTO ANTENNA FRONT LCH SPK. REAR LCH SPK.
Remote Control Ref # Button 1 2 3&7 MODE /POW / Function Press it briefly to select a desired work source . Press this button to turn the unit ON , press and hold to turn the unit OFF. In Disc Playback mode, press for fast forward or back forward playback. In Radio mode, press to scan step by step. 4 AS/ AS function see as page radio Scan operation. In BT mode, press to receive a call. 5 PLAY/ PAUSE In Disc Playback mode, press to pause playback. Press again to start where playback stopped.
Remote Control Ref # Button Function 11 AUDIO/5 Same operation as audio in page 26. 12 MENU/4 In radio mode, press to select the store station 5. 13&21 VOL+/- Press this button briefly to display the root level directory of a digital video disc. In radio mode, press to select the store station 4. Use these controls to adjust the volume level. 14 SEL Press the SEL(in radio mode,press and hold the SEL) to switch between BASS,TREBLE,BALANCE, SWF VOL, SWF FREQ.
Remote Control Preparing the Remote Control Inserting the Battery 1.First push to inside as the direction indicated by the arrow (See 1 )And then Remove the battery holder as the direction indicated by the arrow (See 2 ). 2.Replace the battery Set a new battery property with (+)side up as illustrated (See 3 ). 3.Insert the battery holder. Push in the holder to the original position(See 4 ).
Basic Operation Main Menu Operation ADJUSTABLE ITEMS: In many modes, touch the icon or touch the range to enter the main menu, the message like following as below. GENERAL ANIMATION (2) 2 MINUTE KEY BEEP ON DISC ... RADIO ... General setup interface1 GENERAL BLUETOOTH ON WALLPAPER ... ABOUT ... (3) (1) 1. POWER icon In any modes, touch the POWER icon to switch the unit off . 2.
Basic Operation RADIO ST/MONO: touch to select stereo or mono. small delay and some flickering of the display image which you may find unpleasant. LOCAL: touch to select local or distant. TV TYPE 16:9 REGION: touch to select radio frequency. 4:3 Letter Box BT Touch to select BT function on or off. WALLPAPER Touch to select wallpaper . 4:3 Pan Scan ABOUT Touch to show the version information. CLOCK SETUP Touch the CLOCK to adjust the time and time format.
Basic Operation EQ: touch to select audio mode as follow: ILLUMINATION COLOR USER -> JAZZ -> CLASSIC -> POP -> ROCK Touch to select the color for the display. Tap auto icon to change automatically. LOUDNESS: touch to select loudness on or off. COLOR 20 BRIGHTNESS 20 CALIBRATION Touch the arrow as show to calibration the display. CONTRAST 20 TINT FADER/BALANCE: BALANCE: R 0-10 to L 0-10 Adjust sound balance between left and right speakers .
Control Panel 1 PTY 8 TA AF 9 MU MODE 2 CH1~6 3 RESET H SEL PUS 4 BND 10 _ + VOL 11 OPEN 5 MIC 12 6 REL 7 13 IR AUX IN Control Panel 14 Front View Drawing after Remo ving Control Panel 1. POWER or MODE BUTTON 8. MU/PTY BUTTON 2. >|| or CH1~6 BUTTON 9. TA/AF BUTTON 3. RESET BUTTON 10. BAND BUTTON 4. SEL BUTTON and VOL KNOB 11. MICROPHONE 5. OPEN BUTTON 12. REL BUTTON 6. USB PORT and COVER 13. IR SENSOR WINDOW 7. AUX IN JACK 14.
Touch Screen Operation RADIO OPERATION Briefly touch “ ” to decrease frequency by one step of channel spacing. Listening to Radio Touch the RADIO ICON in home menu to enter the RADIO mode. In radio mode, tap icon to adjust the brightness for the display . Automatic Search During Radio mode, touch and hold (for more than 2 seconds ) either “ / ” ICONS to start search for a radio station automatically.
Touch Screen Operation Automatic Memory Storing & Program Scanning Automatic Preset Setup In Radio Mode, touch and keep (for more than 2 ’ S) the screen of “ ” range to active automatic station storage. The radio searches within the current frequency band, e.g. FM 3 , for the stronger signal level until the search cycle has finished . The six strongest stations are then allocated to the corresponding storage locations . Then the station of the first storage location is set .
Touch Screen Operation PI MUTE : the sound of another station is suppressed . TA Traffic Announcement Touch the AF section on touch screen or swing and keep the SEL knob in the TA/AF direction for about 2 seconds , the AF function is activated. The AF symbol appears in the display . (Priority For Traffic Information) In Radio mode, touch the cursor button to switch the TA function ON and OFF . When the TA function is activated, the TA symbol appears in the display .
Touch Screen Operation BASIC OPERATION Pause (still picture) Touch the “ ” section on touch screen during playback will stop play temporary, touch it again to return the normal playback . on on the remote control to play in random. Each play mode the order is different . Touch it again to cancel this function . Note : in random mode, the button is not available .
Touch Screen Operation BT Operation 1.
Touch Screen Operation Tap a icon such as to show as follow: : Tap to download the contacts from your phone. CONTACTS : Tap for phone number search. & : For page turning. b. Use the number icons to input your desired phone number; * When inputting a wrong digit, use c. After finishing inputting, touch to dial out. icon or < button to delete it. icon or press button on control panel 2) Redial last dialed phone number Touch icon to dial out the last dialed phone number.
Touch Screen Operation 3 . BT MUSIC 1 ) Touch BT MUSIC in home menu or pressing MODE button can pop up BT MUSIC interface as follows: Mute function Play/Pause the playing To select the Equalizer mode To skip the next track To decrease the volume level To skip the previous track To increase the volume level Tap to turn to BT PHONE mode. Loudness Function (After pairing and connecting a phone with BT function).
Touch Screen Operation AUX Operation On the front panel of this unit, there is an AUX IN jack, follow the diagram below to connect analogue replay devices(only for the Audio connect, if you want to connect the Video, please plug the
Touch Screen Operation AV Operation Please plug the
Touch Screen Operation USB OPERATION Card OPERATION Following the diagram below, connect your USB device to the front panel USB port . If it is properly connected, the device will be mounted and start playing automatically. The unit can support playback MP3/WMA/ JPEG/MP4 format which are stored on SD memory cards . Please read the following instructions before you start using a memory card .
Touch Screen Operation STEERING WHEEL CONTROL Touch the SWC icon as follow to turn to steering wheel control . Then tap Assign and tap the button 1 and then select the icon as the picture show, the icon show in button 1 position. After selection tap confirm and back to home menu that means select finish. The function of the icons as follow: Touch to begin function save. After selection touch to confirm operation. During setting, touch the turn to home menu.
Specification General Power Supply Requirement..................................................DC 12V Current consumption........................................................10A MAX. Audio Signal Output ............................................................ 2ch&4ch line out Frequency Response................................................... 20 Hz - 20 KHz S/N Ratio ........................................................................... 90 dB (JIS) Wow and Flutter ............................
Troubleshooting Troubleshooting Please read the user manual carefully before using the car A/V system. If you have any difficulty using this car A/V system, refer to the troubleshooting guide . If you are still unable to resolve the problem after using all the suggestions, please contact your dealer or an authorised service centre . NO PICTURE, SOUND * * Ensure that the power switch is on. Ensure that the power cord is not damaged or the fuse is not blown.
