Operation Manual

HMT 200 7
English
FIRST STEPS
Start, Stand-By & Shutdown
Start
Press and hold the power button (6) for several seconds. The system is started as soon as the XORO
logo or Android operating system logo appears on the display.
Shutdown
Press and hold the power button for a few seccond until the shutdown window is displayed. Confirm
the operation by pressing the OK button on the screen.
Stand by
Press the power button briefly to turn the unit into the stand by mode and the operating mode to
enable.
Software keys
The following will explain the Android system icons:
Home Button
Return to the home screen
Back Button
Returns to the previous operation
Volume Button Controls the volume
The round power button is located in the centre, at the top of the device.
For charging your XORO HMT 200, do only use the original charging cable. Please observe the
information on the nameplate of the charging cable.
Notes:
• The charging cable provides the required power supply. Using any other power cable for
charging the device, may cause damages.
• If possible, do only charge the device when it‘s on low voltage. This will increase the lifetime
of the internal battery.
Charging