Operation Manual

8 HSB50 / HSB75
English
GET STARTED / HOW TO CONNECT
Connect with the power supply
Connect with the TV via the digital inputs
You can use the Digital Optical or Digital Coaxial connector to connect to the HSB50 / HSB75. The-
se 2 connectors are located on the back of the HSB50 / HSB75.
To do this, connect the XORO HSB50 / HSB75
- an optical cable (not included) with the optical jack
- a coaxial cable (included) with the coaxial jack
Connect the other end of the cable to the optical-out or coaxial-out jack on your TV set.
To select the optical / coaxial source, press the OPTICAL / COAXIAL button
on the remote control briefly until OPTI or COAX appears on the display.
In this way, other audio sources, e.g. DVD or Blu-ray players can be connected too.
If your TV set does not have a digital input jack, you can use the analog sound input AUX IN from
the HSB50 / HSB75. The AUX IN input is located on the back of the HSB50 / HSB75.
Use the supplied RCA audio cable and connect the other end of the cable to the AUX-OUT socket
on your TV set.
To select the AUX IN source, press the AUX IN button briefly until AUX IN appears on the display.
You can connect the HSB50 / HSB75 to your mobile phone, TabletPC or MP3 / PM4 player using
the LINE IN jack located on the right side of the unit. Connect the supplied jack <-> jack cable
(3,5mm) with the LINE IN socket and plug the other side into the headphone connection of your
mobile phone, tablet PC or MP3 / MP4 player.
To select the LINE IN input, press the LINE IN button on the remote control briefly until LINE IN
appears on the display.
Connect the soundbar to the power cable that is supplied with a power outlet and position the
soundbar below or above your TV set.
On the HSB75, connect the subwoofer to the main power supply using the supplied power cord.
The connection between the soundboard and subwoofer is wireless.
There is a power switch on the back of the subwoofer, please turn it on.
Other Connections