User manual

4 MPB 1500 / MPB 2000
English
How to Charge Other Devices
USB charging ports: For charging phones, tablets and other devices.
1. Connect your device to one of the MPB1500/MPB2000’s USB charging ports.
2. Push the Multi-function button to begin charging your device.
3.The MPB1500/MPB2000 will automatically shut off when all the connected
devices are charged or cease to draw a current.
Multi-voltage charging: For charging tablets and other devices.
1. Select either the 9V or 12V setting by holding down the power button until the
voltage selection begins to flash (about 3 seconds). Then, to switch between
the voltage selections, press the power button.
2. Connect your device to the MPB1500/MPB2000’s Multi-voltage port.
3. Your device will automatically begin to charge.
4.The MPB1500/MPB2000 will automatically shut off when all the connected
devices are charged or cease to draw a current.
Simultaneous charging and discharging.
To simultaneously charge and discharge the MPB1500/MPB2000 (charge the
external battery while the external battery charges other devices), follow the
above steps to charge the battery and another device.
Note: When the battery’s power level is below 30%, the multi-voltage port will
not charge another device while the battery is being charged. The USB
charging ports are not affected by this limitation.