INTERNAL CONTROLS & FEATURES Relay Bypass Switching - XW-1 uses a relay switch for true bypass switching. Input Gain - Controls wah input gain - by turning clockwise it adds up to +6dB of Wah Boost. Input gain trimmer is only active when the #2 dip switch is activated. INTERNAL DIP SWITCHES - see below for detail SAMPLE SETTINGS DEFAULT SETTINGS 1. TOE DOWN RANGE: Activate to maximize treble frequency. Turn off for darker toe-down frequency response. 2.
EXTERNAL CONTROLS & FEATURES BIAS CONTROL – Turning up the bias control will lead the XW-1 to having slightly more output & firm up bass frequencies along with a more pronounced wah through the sweep. A cold bias is common with vintage wah pedals for a very clear voice that is more transparent in tone and smoother in operation.
ADJUSTABLE RUBBER STOPPER – Located on the backside bottom of the treadle this rubber bumper can be shimmed to adjust the travel range of the pedal. ADJUSTABLE PEDAL TORSION – Fully-adjustable rocker pedal torsion by adjusting Hex nut on the treadle. LED INDICATOR – The LED indicator is located at the top of the XW-1 and lights up when the pedal is on. One unique feature of the XW-1 is the LED will flash if the battery power falls below 50% and indicates that it is time to change the battery. DC JACK – 2.
Xotic Wah XW-1 is modeled based on the Holy Grail wah, 1967-1968 Italian-built Clyde McCoy Wahs.
Warranty Information This product is warranted against failures due to defective parts or faulty workmanship for a period of 1 year after delivery to the original owner. During this 1 year period,we, XOTIC EFFECTS will make necessary repairs without charge for parts and labor. However, shipping charges to and from the repair location must be paid by the owner. * This warranty applies only to the original owner and is not transferable.
