User Manual

ADJUSTABLE RUBBER STOPPER – Located on the backside boom of the treadle this rubber bumper can
be shimmed to adjust the travel range of the pedal.
ADJUSTABLE PEDAL TORSION – Fully-adjustable rocker pedal torsion by adjusting Hex nut on the treadle.
LED INDICATOR – The LED indicator is located at the top of the XW-1 and lights
up when the pedal is on. One unique feature of the XW-1 is
the LED will flash if the baery power falls
below 50% and indicates that it is time to
change the baery.
DC JACK – 2.1mm x 5.5mm 9VDC – Negative
Center. When using a baery, the life of
the baery can be extended if you
unplug the input plug when the effect
is not in use for long periods of time.
Baery access is through the removal
of boom plate (four rubber feet).