Safety Instructions

Table Of Contents

SPECIFICATIONS

XTX200 TRANSMITTER XRX200E RECEIVER

Channels: 2 Channels: 2

Frequencies: 2.405 – 2.475GHz Frequencies: 2.405 – 2.475GHz

Modulation: FHSS spread spectrum Modulation: FHSS spread spectrum

Input Power: 2.20 – 3.0V DC Input Power: 2.9 – 4.2V DC

Output Power: <0.1W Power On Indicator: LED

Power On Indicator: LED

SAFETY PRECAUTIONS

 IMPORTANT! Always follow these instructions when operating this system.

 Do not modify or alter this system.

 The system is suitable for ages 14 and above.

 Switch off the transmitter and take out the battery when it is not in use.

 Do not operate near people or animals.

 Do not allow any water or moisture to make contact with the system.

 Before operating, examine all parts for damage. If any is found, do not operate until the

damage has been repaired.

 Use a clean cloth to wipe the transmitter clean.

 Keep the transmitter and batteries away from direct sunlight and/or heat sources.

 Visit www.xotikmodel.com for repair guides and replacement parts.