User Manual

When a double click is detected, the LED (2) will indicate the eyewear mode:

Player 1: One Quick Blink

Player 2: Two Quick Blinks

Normal 3D*: One Long Blink

*Accessible only if the 3D device is not emitting dual view signal.

Indicating the Battery State

» If LED (2) ashes every couple of seconds during the operation, this

indicates that the battery level is low.

» Charging is indicated by a continuously lit LED (2).

Charging the Battery

To charge the battery of the glasses, use the micro USB cable to connect the

USB charging port on the glasses to a powered USB port (on a computer or

a wall charger with USB compliant output). LED (2) will stay brightly lit until

charging is completed. Charging usually takes up to two hours.

Please, fully charge the glasses prior to the rst use.

Please note that the glasses can’t be used during charging!

Technical Specications

3D Technology: Active Shutter Glasses

Lens type: LCD, TN cell

Sync Method: RF (Radio Frequency, NOT InfraRed)

Shuttering Frequency: 96 Hz to 144 Hz

Operating Temperature: 5 – 45° C

Battery Life: more than 100 hours

Battery Type: Rechargeable Lithium-ion Polymer cell