User's Manual
Table Of Contents
- Microsoft Windows XP Tablet PC Edition 2005
- User Guide
- About This User Guide
- Chapter 1 Getting Started with Your Tablet PC
- Using the Motion Digitizer Pen
- Helpful Hints: Pen and Ink
- Complete the Microsoft Tablet PC Tutorials
- Review User Guide
- Open the Motion Dashboard
- Visit the Microsoft Help and Support Center
- Tablet PC Display
- Fingerprint Reader
- Motion AC Adapter
- Motion Battery Pack
- Battery Status LEDs
- Motion Dashboard
- Motion Third-Party Software Solutions
- Chapter 2 Using Your Motion Tablet PC
- Configuring Tablet and Pen Settings
- Calibrating and Using Your Digital Pen
- Using the Tablet PC Input Panel
- Helpful Hints: Using the TIP Window
- Motion Dashboard Audio System Controls
- Adjusting Display Settings and Screen Brightness
- Creating Schemes for External Monitors
- Helpful Hints: Mirrored and Extended Modes
- Configuring Your Power Management Settings
- Using Your Batteries
- Helpful Hints: Battery and Power Management
- Security Features and Settings
- Motion Security Center
- The Fingerprint Reader and Motion OmniPass
- Helpful Hints: Successful Fingerprint Captures
- Capturing a Fingerprint
- Capturing a Second Fingerprint Later
- Configuring Advanced OmniPass Features
- Logging Onto a Remembered Site
- The OmniPass Help application contains information about exporting your user profile. Go to Motion Dashboard then Motion Security Center > Motion OmniPass, and tap Help in the Action panel.
- Configuring Strong Logon Security
- Infineon Trusted Platform Module
- Windows Security System Components Overview
- Introduction to Speech
- Motion Speak Anywhere Technology
- Speech Recognition
- Helpful Hints: Dictating and Recording
- PC Cards
- SD Cards
- Infrared (IrDA) Port
- USB Ports
- Speaker Port (LE1600 only)
- Microphone Port (LE1600 only)
- DVI-D Connector (LE1600 only)
- VGA Connector
- Docking Connector
- Wi-Fi (802.11) Wireless Connections
- Bluetooth Wireless Connections
- Using the Bluetooth Application
- Helpful Hints: Bluetooth Wireless
- Using Infrared Wireless Connections
- Chapter 3 Care and Maintenance
- General Care
- Caring for the Standard and View Anywhere Displays
- Caring for the Motion Digitizer Pen
- Ordering New Pens
- Traveling by Air
- FAA Wireless Air Travel Requirement
- Other Travel Hints
- Appendix A Troubleshooting and Support
- Standard and Extended Warranty and Insurance Programs
- Appendix B Motion Tablet PC Specifications
Motion Computing LE1600 and LS800 Tablet PC User Guide 31
can set brightness modes from the Motion Dashboard (note: you can also
turn the display off).
• Fixed — Sets the display brightness to a fixed level (ALS is off); use the
slider to adjust the display to the desired brightness level
• Dynamic — Sets the display so that the system adjusts the brightness to
the preferred level under changing lighting conditions while maintaining
viewability (ALS is on)
Setting “Dynamic” Display Brightness: ALS On. When you turn on the
ALS, the display will automatically brighten if you move from dim to bright
light (within the range supported by the hardware), or automatically dim if
you move to an environment with a lower level of lighting. You may not be
able to visibly detect the adjustment. Using ALS also helps to reduce power
consumption when possible.
1. Open the Motion
Dashboard.
2. Under Display, tap the radio
button beside Dynamic.
3. Move the slider until the
Tablet PC display is at the
preferred brightness level.
The system will then auto-
matically adjust the display
brightness to changes in lighting.
Setting “Fixed” Display Brightness: ALS Off.
1. Open the Motion Dashboard.
2. Under Display, tap the radio button beside Fixed.
3. Move the slider until the brightness is at the desired level. The
system will keep the same brightness level at all times; that is, it will
not adjust the display brightness to changes in lighting.
NOTE: In low-light settings, the “Fixed” brightness setting
may keep the display brighter than is needed for good
viewability. Keeping the brightness always at the same level
may also use more battery power than necessary.
Turning the Display On and Off.
1. Open the Motion Dashboard.
2. Tap Off in the Brightness area of the Display settings.
NOTE: To turn the display back on, wave your pen over the
display or press any key on the keyboard. When the display
comes on, the Fixed/Dynamic setting remains selected as it
was.
Changing Display Orientation. An interesting and useful feature of the
Tablet PC is the ability to change the screen orientation from landscape to
portrait by pressing a button. Also, you can rotate the screen in 90-degree
increments. The Tablet PC flexibility in changing the screen orientation
Move slider to preferred
brightness level.