User's Manual

Motion Computing LE1600 and LS800 Tablet PC User Guide 55
12. Confirm the selection by tapping Yes.
Clearing Tablet PC Security. To clear the Tablet PC PhoenixBIOS
security:
1. Start the Tablet PC.
2. When the Motion Computing splash screen appears, quickly press
the Rotate button. If you miss the splash screen, turn the Tablet PC
off then back on and try this step again.
3. From the PhoenixBIOS Set Up Utility, tap Security on the menu bar.
If you have rebooted, you will be prompted to enter the password(s)
you have set up.
4. To clear the System and Password on boot passwords, double-tap
Enter next to Set System Password.
5. Type in the Current Password.
6. Leave the space blank next to Enter New Password.
7. Tap Enter.
8. Leave the space blank to Confirm New Password.
9. Tap Enter.
10. When the Security screen appears, the System Password should be
Clear and the Password on boot Disabled.
11. To clear the HDD password, double-tap Enter next to Set Hard Disk
Password.
12. Type in the Current Password.
13. Leave the space blank next to Enter New Password.
14. Tap Enter.
15. Leave the space blank to Confirm New Password.
16. Tap Enter.
17. When the Security screen appears, the HDD Password should
now display Clear.
SPEECH Introduction to Speech
The speech recognition capability in the Tablet PC provides two distinct
operations; there is a Voice Command mode and a Dictation mode. These
selections are visible as buttons in the Tablet PC Input Panel (TIP). The
following steps lead to success in setting up the speech feature.
• View the tutorial on speech recognition
• Set acceptance angle and the skew using the Motion Dashboard
• Adjust microphone volume
• Go through training
Dictation mode requires additional training and results in converting your
spoken words into “typewritten” text. The Voice Command and Dictation
modes are described in this section.