User's Manual
Table Of Contents
- Microsoft Windows XP Tablet PC Edition 2005
- User Guide
- About This User Guide
- Chapter 1 Getting Started with Your Tablet PC
- Using the Motion Digitizer Pen
- Helpful Hints: Pen and Ink
- Complete the Microsoft Tablet PC Tutorials
- Review User Guide
- Open the Motion Dashboard
- Visit the Microsoft Help and Support Center
- Tablet PC Display
- Fingerprint Reader
- Motion AC Adapter
- Motion Battery Pack
- Battery Status LEDs
- Motion Dashboard
- Motion Third-Party Software Solutions
- Chapter 2 Using Your Motion Tablet PC
- Configuring Tablet and Pen Settings
- Calibrating and Using Your Digital Pen
- Using the Tablet PC Input Panel
- Helpful Hints: Using the TIP Window
- Motion Dashboard Audio System Controls
- Adjusting Display Settings and Screen Brightness
- Creating Schemes for External Monitors
- Helpful Hints: Mirrored and Extended Modes
- Configuring Your Power Management Settings
- Using Your Batteries
- Helpful Hints: Battery and Power Management
- Security Features and Settings
- Motion Security Center
- The Fingerprint Reader and Motion OmniPass
- Helpful Hints: Successful Fingerprint Captures
- Capturing a Fingerprint
- Capturing a Second Fingerprint Later
- Configuring Advanced OmniPass Features
- Logging Onto a Remembered Site
- The OmniPass Help application contains information about exporting your user profile. Go to Motion Dashboard then Motion Security Center > Motion OmniPass, and tap Help in the Action panel.
- Configuring Strong Logon Security
- Infineon Trusted Platform Module
- Windows Security System Components Overview
- Introduction to Speech
- Motion Speak Anywhere Technology
- Speech Recognition
- Helpful Hints: Dictating and Recording
- PC Cards
- SD Cards
- Infrared (IrDA) Port
- USB Ports
- Speaker Port (LE1600 only)
- Microphone Port (LE1600 only)
- DVI-D Connector (LE1600 only)
- VGA Connector
- Docking Connector
- Wi-Fi (802.11) Wireless Connections
- Bluetooth Wireless Connections
- Using the Bluetooth Application
- Helpful Hints: Bluetooth Wireless
- Using Infrared Wireless Connections
- Chapter 3 Care and Maintenance
- General Care
- Caring for the Standard and View Anywhere Displays
- Caring for the Motion Digitizer Pen
- Ordering New Pens
- Traveling by Air
- FAA Wireless Air Travel Requirement
- Other Travel Hints
- Appendix A Troubleshooting and Support
- Standard and Extended Warranty and Insurance Programs
- Appendix B Motion Tablet PC Specifications
Motion Computing LE1600 and LS800 Tablet PC User Guide 25
does not seem to line up with the pen tip. Calibration ensures the accuracy
of the pen and adjusts the input angle for each person who uses it. The
Tablet PC stores calibration data and settings on a per-user basis.
1. Open the Motion Dashboard and tap Calibrate Digitizer.
Or double-tap the Tablet and Pen Settings icon in the
system tray, located in the lower right-hand corner of the
display window. This opens the Tablet and Pen Settings
window.
NOTE: The Tablet and Pen Settings icon may be hidden in
the system tray. Tap the system tray left-arrow to show all
hidden icons.
2. Hold the pen naturally, angled as if you are writing with a pen, and
tap the pen point in the center of each of the four calibration
crosshairs as they appear. During calibration, try to position the
Tablet PC as close to the way you will use it as possible, whether
holding it in portrait or landscape orientation or using it in a FlexDock
for the LE Series or with a Convertible Keyboard. Changing the pen
or display angles affects the calibration.
3. If you change the orientation, you may need to calibrate the pen
again.
When using the pen as a cursor, you can determine if you are in the right
place to select a menu item. For example, look at the position of the pointer
on the screen, not where the pen touches the display.
CAUTION: Do not write on the Tablet PC display
with ink pens or other sharp objects that could
damage it. Do not use markers that could also
damage the display.