User's Manual

34 Motion Computing LE1600 and LS800 Tablet PC User Guide
Setting Up an Extended Display. Use this feature when you want to
simultaneously open applications on two monitors and significantly expand
your workspace without hiding open documents under layers of other work.
This example shows the Tablet PC (1) and an external monitor (2) with an
Excel spreadsheet extended across both. It also shows a Word document
(4) on the Tablet PC and e-mail (5) on the extended desktop.
Extended Desktop Example: (1) Tablet PC display; (2) external monitor; (3)
spreadsheet; (4) Word document; (5) email message
To Extend the Tablet PC Display, do the following:
1. Open the Motion Dashboard.
2. Tap the Extend Display radio button under External Monitor. This
setting automatically extends the Tablet PC display to the external
monitor.
NOTE: You can also tap the icon for the Intel Graphics Media
Accelerator Driver for Mobile in the system tray at the bottom
right of the Tablet PC display (or found in the Windows Control
Panel as Intel GMA Driver for Mobile) to set up this feature
from the pop-up menu, or tabbed window respectively.
Creating Schemes for External Monitors
To create a special screen resolution scheme. This feature can be used
to create named schemes for one or more external monitors. After creating
and saving the scheme, you can access it by right-clicking on the operating
system desktop and selecting the scheme name from the pop-up menu that
is shown.
1. Tap the Intel Graphics Media Accelerator Driver for Mobile icon
in the system tray, located at the bottom-right corner of the display;
then select Graphics Options > Graphics Properties.
2. This example illustrates the Mobile Intel 915GM/GMS, 910GML
Express Chipset Family window. From that window, select the
Schemes tab. The current Video Mode is displayed (the following
example applies to the LE1600 Tablet PC only).
3. Select the desired video mode for the new scheme
4. Tap the New... button in this window.
5. Type in a name for the new scheme. Tap OK to save the scheme.
6. Highlight this new scheme in the Schemes window.
7. Add or change the parameters for this scheme.