User's Manual

Chapter 2. Using the Tablet
XC6 User’s Handbook 26
Resuming operation
To resume operation when the computer is in Sleep mode, press the
Power On/Off, Backlight On/Off, Suspend/Resume button.
Note: Press the button only once.
Power On/Off, Backlight On/Off,
Sleep/Resume button
Approximately 20 seconds later, the computer resumes normal
operation. When the Status LED displays a continuous green light, you
can begin using the computer.
Using the pen
You can use any of the following methods to select items and to
navigate through programs.
■ Auto-Sense mode: Use either the multifunction pen or your finger
interchangeably. The computer distinguishes between the two input
modes and automatically adjusts accordingly. This is the tablet’s
default state.
■ Digitizer mode: Use only the special multifunction pen provided
with the computer.
For more information, see “Programming hot keys to perform pre-
defined functions” on page 65.
WARNING
Do not use items such as a ball point pen or a screwdriver that can
damage the tablet. Damage caused by using an item not provided with
the tablet is not covered by the tablet warranty.
Note: During the first use of the tablet, or if the action you are
trying to perform does not occur when you use the pen or your
finger to touch the screen, calibrate the digitizer as described in
“Calibrating the digitizer” on page 75.