Installation Instructions

7-14
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows
OL-1394-06
Chapter 7 Performing Diagnostics
Viewing Statistics for Your Client Adapter
Authentication Time-out The number of times the client adapter tried to authenticate to an
access point but was unable to because the access point did not
respond fast enough (timed out).
Association Rejects The number of times the client adapter tried to associate to an
access point but was rejected.
Association Time-out The number of times the client adapter tried to associate to an
access point but was unable to because the access point did not
respond fast enough (timed out).
Packets Aged The number of packets received successfully but discarded by the
client adapter because either all fragments were not received
within 10 seconds or the host did not read the packet from the
adapter within 10 seconds.
Packets MIC OK The number of packets that were received successfully with a
valid message integrity check (MIC).
Note This field is not displayed if MIC is not enabled on the
access point.
Packets No MIC The number of packets that were discarded due to no MIC being
found.
Note This field is not displayed if MIC is not enabled on the
access point.
Packets Incorrect MIC The number of packets that were discarded due to an incorrect
MIC value.
Note This field is not displayed if MIC is not enabled on the
access point.
Packets No MIC Seed The number of packets that were discarded due to no MIC seed
being received.
Note This field is not displayed if MIC is not enabled on the
access point.
Packets Wrong MIC Sequence The number of packets that were discarded due to the MIC
sequence number being wrong.
Note This field is not displayed if MIC is not enabled on the
access point.
Up Time (hh:mm:ss) The amount of time (in hours:minutes:seconds) since the Reset
button was selected. If the client adapter has been running for
more than 24 hours, the time is displayed in days,
hours:minutes:seconds.
Total Up Time (hh:mm:ss) The amount of time (in hours:minutes:seconds) that the client
adapter has been receiving power. The total up time continues to
increment even if the Reset button is selected. If the adapter has
been running for more than 24 hours, the time is displayed in
days, hours:minutes:seconds.
Table 7-4 Client Adapter Statistics (continued)
Statistic Description