Installation Instructions

8-3

Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows

OL-1394-06

Chapter 8 Using the Aironet Client Monitor (ACM)

Tool Tip Window

When you hover the cursor over the ACM icon, the Tool Tip window appears (see Figure 8-1).

Figure 8-1 Tool Tip Window

This window provides information on the current status of your client adapter. Table 8-2 lists and

describes each element of the Tool Tip window.

Table 8-2 Tool Tip Window Elements

Status Element Description

Active profile The network configuration (or profile) that your client adapter is

currently using.

Note If auto profile selection is enabled, the profile name is preceded

by the word Auto.

Note If an application other than ACU was used to configure the

client adapter, Other Configuration Application appears.

SSID The name of the network to which your client adapter is currently

associated.

Note Refer to the SSID1 parameter in Table 5-2 for information on

setting the client adapter’s SSID.