Installation Instructions

3-18
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows
OL-1394-06
Chapter 3 Installing the Client Adapter
Installing or Upgrading the Client Adapter Software
Program Feature Overrides Determines which ACM components are enabled. If any components
are not selected now and you later want to use them, you must run this
installation program again and enable them.
Components: See the table below
Options per component: Enable or Disable
Default per component: Enable
Component Description
About Box (Help) Displays the ACM version number and
enables you to access the online help.
Exit Program Closes ACM for all client adapters.
Launch Aironet Client
Utility
Activates ACU, if it is installed.
Troubleshooting Activates the troubleshooting utility,
which enables you to identify and resolve
configuration and association problems
with your client adapter.
Preferences Enables you to determine when ACM runs
and to select the options that appear on the
ACM pop-up menu.
Turn Radio On/Off Turns the client adapter’s radio on or off.
Reauthenticate Forces your client adapter to try to
reauthenticate using the username and
password of the current profile.
Select Profile Enables you to select the active profile for
your client adapter.
Auto Profile Selection Causes the client adapter’s driver to
automatically select a profile from the list
of profiles that were set up in ACU to be
included in auto profile selection.
Other Configuration
Application
Enables an application other than ACU to
configure the client adapter.
Show Connection Status Provides information on the current status
of your client adapter.
Menu Options (Defaults) Determines which options are displayed on the ACM pop-up menu.
Menu options: About Box (Help), Exit Program, Launch Aironet
Client Utility, Troubleshooting, Turn Radio On/Off,
Reauthenticate, Select Profile, Show Connection
Status
Options per menu option: Show or Hide
Default per menu option: Show
Table 3-2 Software Components and Their Parameters (continued)
Component or Parameter Description