User Manual

6-4
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows
OL-1394-06
Chapter 6 Using EAP Authentication
Using LEAP with the Windows Username and Password
If the authentication attempt fails, an error message appears after the LEAP timeout period has
expired. Refer to the “LEAP Authentication Error Messages” section on page 10-18 for the
necessary action to take.
After a Reboot or Logon
After your computer reboots or you log on, follow the steps below to LEAP authenticate.
Step 1 When the Windows login screen appears (see Figure 6-2 and Figure 6-3), enter your Windows username
and password and click OK. The domain name is optional.
Note If your computer is running Windows NT, 2000, or XP and has Novell Client 32 software
installed, a separate LEAP login screen appears before the Novell login screen. If this occurs,
enter your Windows and Novell username and password in the login screens and click OK.
Figure 6-2 Windows Login Screen (Windows 98, 98 SE, and Me)
Figure 6-3 Windows Login Screen (Windows NT)