User Manual

8-11
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows
OL-1394-06
Chapter 8 Using the Aironet Client Monitor (ACM)
Pop-Up Menu
SSID The name of the network to which your client adapter is currently
associated.
Note Refer to the SSID1 parameter in Table 5-2 for information on
setting the client adapter’s SSID.
Access Point Name The name of the access point to which your client adapter is associated.
It is shown only if the client adapter is in infrastructure mode, the
access point was configured with a name, and Aironet Extensions are
enabled (on access points running Cisco IOS release 12.2(4)JA or
greater).
Access Point IP Address The IP address of the access point to which your client adapter is
associated. It is shown only if the client adapter is in infrastructure
mode, the access point was configured with an IP address, and Aironet
Extensions are enabled (on access points running Cisco IOS release
12.2(4)JA or greater).
Note If Aironet Extensions are disabled, the IP address of the
associated access point is shown as 0.0.0.0.
Link Speed The rate at which your client adapter is currently transmitting data
packets.
Value: 1, 2, 5.5, or 11 Mbps (2.4-GHz client adapters);
6, 9, 12, 18, 24, 36, 48, or 54 Mbps (5-GHz client adapters)
Client Adapter IP Address The IP address of your client adapter.
Table 8-3 Connection Status Screen Elements (continued)
Status Element Description