User Manual

9-7
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows
OL-1394-06
Chapter 9 Routine Procedures
Client Adapter Software Procedures
Figure 9-3 Cisco Aironet Wireless LAN Client Adapter Installation Wizard screen
Step 4 Select Uninstall All Components and click Next.
Step 5 When prompted to confirm your decision, click Yes. The process to uninstall the files begins. You are
notified throughout the process as each component is uninstalled.
Step 6 When the process completes, you are notified that the system is about to reboot. Close any open
applications and click OK.
Step 7 If you did not remove the client adapter from your computer, the Found New Hardware Wizard screen
appears after your computer reboots. Click Cancel.
Note The Found New Hardware Wizard screen does not appear on computers running Windows NT.
Step 8 This procedure does not remove the Install Wizard file or its uncompressed files. If you want to remove
them from your computer, find the files using Windows Explorer and delete them.
Finding the Driver Version
Follow the instructions in this section to find the version of the driver that is currently installed for your
client adapter.
Step 1 Open ACU.
Step 2 Click the Status icon or select Status from the Commands drop-down menu. The Status screen displays
the current version of your client adapter’s driver in the NDIS Driver Version field.