User Manual

E-9
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows
OL-1394-06
Appendix E Configuring the Client Adapter through Windows XP
Configuring the Client Adapter
Figure E-4 Smart Card or other Certificate Properties Screen
Step 5 Select the Use a certificate on this computer option.
Step 6 Check the Validate server certificate check box if server certificate validation is required.
Step 7 If you want to specify the name of the server to connect to, check the Connect only if server name ends
with check box and enter the appropriate server name suffix in the field below.
Note If you enter a server name and the client adapter connects to a server that does not match the
name you entered, you are prompted to accept or cancel the connection during the authentication
process.
Note If you leave this field blank, the server name is not verified, and a connection is established as
long as the certificate is valid.
Step 8 Make sure that the name of the certificate authority from which the server certificate was downloaded
appears in the Trusted root certificate authority field.
Note If you leave this field blank, you are prompted to accept a connection to the root certification
authority during the authentication process.
Step 9 Click OK twice to save your settings. The configuration is complete.