User Manual

3-9
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows
OL-1394-06
Chapter 3 Installing the Client Adapter
Installing or Upgrading the Client Adapter Software
Security Modules
LEAP Installs the LEAP supplicant version included in the Install Wizard
file. Installing the LEAP supplicant enables you to create a profile in
ACU that uses LEAP authentication. If this option is not selected now
and you later want to create a profile that uses LEAP, you must run
this installation program again and select this option.
Default: Checked
Note Refer to Chapter 5 for information on enabling LEAP.
Note If you select LEAP on a Windows 98 or 98 SE device, a
Microsoft hot fix is installed during installation of the LEAP
security module to fix two problems related to the use of
LEAP. Refer to Chapter 10 for more information on the hot
fix.
Note If you select LEAP on a Windows XP device, Windows XP’s
fast user switching feature is disabled.
Allow Saved LEAP
User Name and
Password
Enables you to create a profile in ACU that uses a saved (rather than
temporary) username and password for LEAP authentication. When
such a profile is used, the saved username and password are used to
start the LEAP authentication process, and you are not prompted to
enter them.
Options: Yes or No
Default: Yes
EAP-SIM Installs the EAP-SIM supplicant version included in the Install
Wizard file. Installing the EAP-SIM supplicant enables the client to
support EAP-SIM authentication. If this option is not selected now
and you later want to use EAP-SIM, you must run this installation
program again and select this option.
Default: Unchecked
Note Refer to Chapter 5 for information on enabling EAP-SIM.
Note To enable EAP-SIM authentication, your computer must run
Windows 2000 with the Microsoft 802.1X supplicant
installed or Windows XP.
Note If you installed the new EAP-SIM supplicant from the ftpeng
FTP server, make sure the EAP-SIM option is not selected.
Otherwise, the EAP-SIM supplicant included in the Install
Wizard file overwrites the new supplicant’s settings.
Table 3-1 Software Components and Their Parameters (continued)
Component or Parameter Description