User's Guide
9
5. Go to “Encryption” page. If the WEP of the chosen network is disabled, make
sure the check box of “Data Encryption” is cleared, and click “Apply” button if it
appears functional. The connection is then executed and the
communication-status icon appears green. If the WEP is enabled, please see next
step.
6. If the WEP of the chosen network is enabled, in “Encryption” page, please set the
“Network Key”, and then click “Apply” button. You need to contact the network
administrator for the values the Network Keys.
7. Once connected, you can check the Link Quality and Signal Strength from “Link
Info” page.