User's Guide

17
5.8 Default Settings Windows XP Zero-Configuration
You may also choose the default parameters and directly proceed to Windows XP
zero-configuration through the steps below:
1. Go to “Control Panel” and open “Network Connections”.
2. Right-click the Wireless Network Connection of the IEEE802.11b WLAN
miniPCI, and make sure this connection is Enabled.
3. Right-click the Wireless Network Connection of the IEEE802.11b WLAN
miniPCI, and then click “Properties”.
4. Select “Wireless Networks” tab and select “Use Windows to configure my
wireless network settings” check box.
Note! Clear the check box of “Use Windows to configure my wireless network
settings” will disable automatic wireless network configuration.