User's Manual
Table Of Contents
- Contents
- 1 Getting Started 21
- 2 Using the iX104AtR 35
- 3 Maintaining the iX104AtR 75
- Welcome
- 1 Getting Started
- 2 Using the iX104AtR
- Turning on the computer
- Turning off the computer
- Suspending and resuming operation
- Using the pen
- Using the joystick (the navigation control key)
- Changing the screen orientation
- Adjusting the screen brightness
- Docking the tablet
- Connecting devices
- Using the battery
- Programming hot keys
- 3 Maintaining the iX104AtR
- A Troubleshooting
- B Using BIOS and AOS Functions
- C Glossary
- D Hardware Specifications
- E Agency Notices
- Index
Chapter 2. Using the iX104AtR
Using the battery
58 iX104AtR User’s Handbook
Removing and installing the battery
You can remove the battery and use an (optional) external charger to
charge it.
Removing the battery
1.
To swap with a charged battery:
Use one of the methods described in “Suspending operation”
on page 40 to suspend operation.
If a charged battery is not available:
Save your work and close all running programs; then shut
down the computer or put the computer in Hibernation mode
(see “Suspending operation” on page 40).
Note: To avoid losing unsaved data, wait until the computer
has completed switching to Suspended mode before
removing the battery.
2. Use the stylus or a pen to depress the battery lock button.
3. On the computer, slide the battery release latch toward the lock
button.
The battery unlocks and slightly rises from the computer.