User's Manual
Table Of Contents
- Contents
- 1 Getting Started 21
- 2 Using the iX104AtR 35
- 3 Maintaining the iX104AtR 75
- Welcome
- 1 Getting Started
- 2 Using the iX104AtR
- Turning on the computer
- Turning off the computer
- Suspending and resuming operation
- Using the pen
- Using the joystick (the navigation control key)
- Changing the screen orientation
- Adjusting the screen brightness
- Docking the tablet
- Connecting devices
- Using the battery
- Programming hot keys
- 3 Maintaining the iX104AtR
- A Troubleshooting
- B Using BIOS and AOS Functions
- C Glossary
- D Hardware Specifications
- E Agency Notices
- Index
Chapter 1. Getting Started
Quick-start guide
32 iX104AtR User’s Handbook
Table 4 Function mode keys
Press these keys... To perform this function
Dim the brightness of the LCD backlight.
Increase the brightness of the LCD backlight.
Send video display to a monitor or projection
panel connected to the computer (and back to the
computer again). (This key combination is not
programmable.)
Default function:
iX104AtR: Open a pre-defined program (see
“Programming hot keys to start applications, open
documents, or go to a Web site” on page 66).
iX104AtR
2
: Select Auto-Sense mode, Active
mode, or Touch mode. This determines the input
devices you can use. In Active mode, you can use
only the pen. In Touch mode, you can use the
pen, your finger, or another similar pointing
device. You can program this key combination to
perform a different function. (See “Programming
hot keys to start applications, open documents, or
go to a Web site” on page 66.)
Default function: Open the pen calibration
program. You can program this key combination
to perform a different function.
Perform the same functions as the Esc key on a
keyboard.