iX101T1 User Handbook Revision 1.
Contents Disclaimer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Copyright . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Publication information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Declaration of conformity . . . . . . . . .
Contents 3 Maintaining the Tablet Caring for the tablet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Checking power cords and connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Protecting the computer from damage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Storing the computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Caring for the display screen . . . . . . . . . .
Contents A Troubleshooting 27 B Hardware Specifications 29 C Agency Notices 36
Disclaimer Xplore Technologies® has made every effort to ensure the accuracy and completeness of this document; however, because ongoing development efforts are made to continually improve the capabilities of our products, we cannot guarantee the accuracy of the contents of this document. We disclaim liability for errors, omissions, or future changes herein. Trademarks Xplore and the Xplore logo are registered trademarks of Xplore Technologies Corp.
Declaration of conformity DECLARATION OF CONFORMITY according to FCC Part 15, IC ICES-003, and RTT&E directives Responsible Party Name: Xplore Technologies Corp. Address: 14000 Summit Drive, Suite 900, Austin, Texas 78728 Telephone: 512.336.7797 Declares that product: Model Series: iX101T1 complies with Part 15 of the FCC Rules. This device complies with Part 15 of the FCC rules.
Radio signals from your tablet will not affect the operation of most modern equipment, but certain electronic equipment, including automotive systems, may not be shielded against radio signals from your tablet. Check with the manufacturer of your motor vehicle or the manufacturer’s representative to determine whether using the tablet will present any safety issues. Avoid using the tablet in any environment that requires your full attention, such as when driving a vehicle.
WARNING EXPLOSION HAZARD - DO NOT DISCONNECT EQUIPMENT UNLESS POWER HAS BEEN SWITCHED OFF OR THE AREA IS KNOWN TO BE NON-HAZARDOUS AVERTISSEMENT - RISQUE D'EXPLOSION AVANT DE DECONNECTER L'EQUIPEMENT, COUPER LE COURANT OU S'ASSURER QUE L'EMPLACEMENT EST DESIGNE NON DANGEREUX. WARNING Do not use any dock or any other accessory or attachment that is not manufactured or supplied by Xplore or an authorized Xplore accessories supplier.
Welcome Welcome to the Xplore Technologies® iX101T1™tablet , the rugged tablet designed, tested, and manufactured to meet the environmental and physical real-world challenges faced by today’s mobile workers. Based on years of experience in rugged mobile applications, the iX101T1 is designed to withstand the abuses of everyday wear and tear. Advanced technology, innovative design, and a rugged case are just a few highlights of your iX101T1 system.
Welcome About your computer The iX101T1 is a high-performance tablet that runs on Google ® Android ® operating system. The method you use to control the tablet is as follows: Tablet Model iX101T1 Touchscreen Projected Capacitive Touch (PCT) Control Method · Special, enhanced pen (Optional with the tablet) · One or two fingers Note: In this handbook, all information applies to all models unless otherwise noted.
Welcome All iX101T1 tablets have been engineered and tested to meet Military Standards for Environmental Extremes (MIL STD 810G).
Welcome Optional accessories Your package may also include any optional accessories you ordered.
Welcome Contacting Xplore – service and questions Note: To troubleshoot problems (including wireless and GPS problems), before you call, read the FAQ page of the Xplore Technologies Web site. Go to http://www.xploretech.com; then select Customer Support; then FAQ. If you purchased your tablet from an authorized Xplore dealer, contact the dealer for service and support.
1 Getting Started This chapter gives you an overview of your tablet and includes a quick-start guides. Front view Built-in microphone Auto Light sensor Front Camera Status indicator Home Button Enables you to input mono audio Built-in Microphone Front Camera HD Video front facing camera for video conferencing, video capture or still picture capture. Status indicator Indicates the computer status (on, off, charging) Home Button for easy navigation within the Android environment.
Chapter 1. Getting Started Back view Camera Flash 5MP Camera Battery Cover I/O Port Door Speaker Expansion Bay Door AC Power Device Information Speaker Integrated Speaker for Audio Playback Powers the commuter when connected to AC power supply.
Chapter 1. Getting Started Right side view Power (On/Off)/ Suspend/Resume button Volume Down UP AC Power Connector Speaker Screen Orientation Lock Power (On/Off)/ Press to power computer, press and hold for 4 seconds to force power off use Suspend (On/Off)/ Momentarily depress to enter/exit Suspend mode. Screen Orientation lock Locks the screen in current position regardless of tablet orientation when pressed.
Chapter 1. Getting Started Left side view HDMI out Power Switch USB ports Audio connector WAN SIM Card Slot SD Card Slot HDMI Input LAN connector The connectors on the side of the computer are located behind the outer doors. Audio connector Headset connector for Apple compatible earphones and microphone USB 2.0 ports One Universal Serial Bus (compliant with USB Standard Revision 2.0) HOST and One Micro-B OTG connector.
Chapter 1. Getting Started Bottom view Bottom view Docking connector for the optional Xplore Tablet Dock Kensington lock ___ Guide pin receptacles Docking connector Enables you to connect the optional xStand Desktop Docking Station or xDock Guide pin receptacles Help assure a secure connection of the optional xStand or xDock. Vehicle Docking Stations. Note: See “Optional accessories” on page 16.
Chapter 1. Getting Started LED Status indicator The LED Status indicator lights show the status of system functions. The following table defines the various LED states. Table 1 Status LED indicator Mode/State LED State Meaning On state green, continuous The computer is on, ready for use, and functioning On Charging green, blinking The AC adapter is plugged in and the battery is Off state off (no light) The computer is off.
Chapter 1. Getting Started Table 1 Status LED indicator (continued) Mode/State LED State Meaning On red, blinking The computer is powered on, running on battery power, and the charge level in the battery has reached a minimum warning state. Plug the computer into an AC/DC power source or install a charged battery. On red, continuous The computer is on, running on battery power, and the charge level in the battery has reached a critical state.
Chapter 1. Getting Started Quick-start guide Quick-start guide First-Time Operation First time Turning on the computer 1. Find and Turn the Battery switch ON. A small screwdriver or paperclip may be used for this purpose. For Safety reasons the tablet is shipped with the Battery switch OFF and the tablet will not operate if this step is not taken.
Chapter 2. Using the Tablet Turning On/Off the computer Turning on the computer 1 Press the Power On/Off/Suspend/Resume button. 2. Drag 3. Or Drag to with finger to unlock screen to to start Camera application. Turning off the computer 1. If the computer is in Suspend mode, press the Power On/Off/ Suspend/Resume button to resume operation. 2. Make sure the battery is charged or that the computer is plugged in to an external power source. 3. Save your work. 4.
Chapter 2. Using the Tablet Suspending and resuming operation Suspend operation To conserve battery power when you do not want to turn off the computer, put the computer into Suspend mode. (You can suspend operation without closing any apps.). The default configuration at time of purchase is for the system to enter suspend mode automatically after 5 minutes of no activity. To manually enter suspend mode press the Power switch briefly and release.
Chapter 2.
2 Maintaining the Tablet This chapter provides instructions for maintaining your tablet. Caring for the tablet This section provides information about how to keep your tablet in top working condition. Checking power cords and connectors Check AC and DC power cords and power connectors periodically for damage. Replace the power cord immediately if you find any damage. Protecting the computer from damage ■ Your computer is designed to sustain a multiple-axis drop to a non-yielding surface.
Caring for the tablet Chapter 3. Maintaining the Tablet Caring for the tablet Storing the computer You can store the computer in the Off state for about 30 days with a fully charged battery installed. After this period, recharge the battery or replace it with a charged battery. . Caring for the display screen To clean the display screen, dampen a soft cotton cloth with water and gently wipe the screen surface. Note: Do not use isopropyl alcohol to clean the screen.
Chapter 3. Maintaining the Tablet Removing the screen protector Slide your fingernail under the edge of the screen protector and pull the protector away from the screen. Installing a new screen protector Follow the instructions included with your screen protector replacement kit. Note: If a screen protector is already installed on the display screen, remove it before installing the new screen protector.
A Troubleshooting Table 7 contains solutions to some problems. If you cannot solve the problem by taking the actions described, contact your local help desk or your reseller for further assistance. Table 7 Troubleshooting Problem Possible cause and solution Computer will not start. · The battery may be defective or discharged to a critically low level. Connect an external power supply (such as the AC adapter) or install a charged battery. See “Using the battery” on page 54.
Appendix A. Troubleshooting Table 7 Troubleshooting (continued) Problem Possible cause and solution Display screen is blank or difficult to read. · Confirm that the computer is on (the Power icon is displayed continuously in the Status area). · The brightness may be set too low, causing the screen to appear too dark. To change system brightness, press Settings Icon, Display, Brightness. · The video time-out may have expired. Tap the display screen to reactivate the display.
B Hardware Specifications Physical Dimensions 11.20” x 8.25” x 1.6” (WxHxD) 283.9mm x 209.3mm x 40.8mm Weight 5.25 lbs. (2.38 kgs)* Processing CPU OMAP4470 Dual core ARM A9 Chip set Up to 1.5 GHz* Processor speed * Varies according to your computer’s configuration. Memory/storage Main RAM 1GB LPDDR2 RAM Options None L2 Cache 1MB cache Storage 32GB eMMC Storage Expansion up to 160GB One User accessible micro SD .
Appendix B. Hardware Specifications Display Display · Color LCD · Projected Capacitive Touch Panel · 10.1 TFT WVGA (1366x768), 16M colors · Brightness:up to 500 nits · Viewing Angle: - Horizontal: 60 degrees (min.) - Vertical: 10 degrees (min.) - Contrast Ratio: Typ. 500:1, Min 100:1 Graphics Powerful Imagination PowerVR SX544 Graphics processor for low-power, high-performance 3D/2D graphics, video, and display capabilities.
Appendix B. Hardware Specifications Interface Wireless Radios · One internal WiFi 802.11 abgn · One Bluetooth radio · One FM Transmitter Integrated Interfaces · DC-in · USB (2) 2.
Appendix B. Hardware Specifications Power (continued) AC Adapter Auto-sensing 100-240V, supplying 19 VDC, with a current of 3.42 A Environmental Temperature · Operating: -5⁰ to 140⁰ F (-23⁰ to 60⁰ C) · Storage: -40⁰ to 167⁰ F (-40⁰ to 75⁰ C) Humidity 0% to 95% non-condensing Shock/Drop Four-foot drop to plywood, operating, on all surfaces, edges and corners Vibration 0.
Appendix B. Hardware Specifications Environmental (continued) Enclosure Class Blowing rain: 4”/hr, 40 mph wind and MIL-STD-810G Method 506.4 Procedure 1 Drip: 7 gal/ft2/hr MIL-STD-810G Method 506.4 Procedure III Sand and dust: Particle size < 149 µm, 10 + 7 g/m3 particle density 1.5 m/s to 8.9 m/s wind speed MIL-STD-810G Method 510.4 Procedure 1 Salt Fog: 5% saline for 48 hr (12 hr wet, 12 hr dry, 2 cycles) MIL-STD-810G Method 509.
Appendix B. Hardware Specifications Operating system Operating Systems 34 · Google Android 4.
C Agency Notices FCC notices This device complies with Part 15 of the FCC Rules .Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Modifications not expressly approved by Xplore Technologies could void this user’s authority to operate the equipment.
iX101T1 User’s Handbook 35
Appendix C. Agency Notices Before a tablet PC model is available for sale to the public, it must be tested and certified to the FCC and IC that it does not exceed the limit established by the government-adopted requirement for safe exposure. The tests are performed in positions and locations (e.g., next to body/lap) as required by the FCC for each model. (next to body/lap measurements may differ among tablet PC models, depending upon available accessories and FCC and IC requirements).
Appendix C. Agency Notices International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1996 Ministry of Health (Canada), Safety Code 6. The standards include a ■ substantial safety margin designed to assure the safety of all persons, regardless of age and health. European Union RTT&E Directive for SAR The exposure standard for wireless mobile tablet PCs employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg.
Appendix C. Agency Notices UL Notice This unit requires an AC adapter to operate. Use only UL Listed Class 2 Adapters with an output rating of 19 VDC, with a current of 3.42 A. AC Adapter output polarity: For authorized repair technicians only WARNING For continued protection against risk of fire, replace only with the same type and rating fuse. WARNING Danger of explosion if Lithium (clock) battery is incorrectly replaced. Replace only with the same equivalent type recommended by the manufacturer.
39
