Product Reference Guide for Windows 10

Wireless
49
Near Field Communications
The device supports reading NFC cards. The NFC antenna is located on the back of the device under the
NFC logo.
Enabling NFC
NFC is disabled by default. Before using NFC, you must enable it in the BIOS and then in Windows.
1. Enter the BIOS setup. See Enter the BIOS on page 35.
2. From the BIOS setup screen, select the Advanced tab.
3. Select NFC Controller > Enabled.
4. Select the Save & Exit tab.
5. Select Exit Saving Changes > Yes.
6. After Windows loads, go to Settings > Network & Internet > Airplane mode. Under Wireless
devices, select the NFC slider to turn it on.
Reading NFC Cards
The tablet supports reading NFC cards. The NFC antenna is located on the back of the tablet under the
NFC logo.
With an NFC enabled application open, bring the NFC card toward the antenna. Depending upon the
application, an audio or visual indication indicates successful reading of the card.