Operation Manual

Table Of Contents

4. Attach the magnet to the left crank. Do not fully tighten.

5. Adjust the magnets and the sensors, making sure the air gap between sensor

markings and magnets is less than 5 mm.

6. When setup is complete, tighten the cable ties.

Changing the Combo Cadence Battery

1. Using a coin, turn the battery cover on the back of the sensor

counter-clockwise until it opens.

2. Remove the old battery and replace with a new one.

3. Replace the battery cover and tighten with a coin.

Power Meter (optional)

The following power meter devices are compatible to your Xplova E5: SRM, Quarq,

Power2Max.

NOTE: For the most updated compatible ANT+ power meter information, visit