Operation Manual

35
Pairing with the Power Meter
1. Rotate your bicycle crank to turn on the power meter.
2. Paired the power meter with your Xplova E5 (see “To pair a Power Sensor:” on
page 26).
3. Long press to bring up the menu.
4. Short press repeatedly to scroll to BIKE.
5. Short press to enter the BIKE menu.
6. Short press repeatedly to scroll to PWR.
7. Short press to enter the PWR submenu.
8. Short press to select ON.
9. Short press to start pairing. The Xplova E5
will scan and pair with your combo cadence.
10. When done, press to return and exit the menu.
Calibrating the Power Meter
1. Make sure the power meter is turned on and paired with your Xplova E5.
2. Long press to bring up the menu.
3. Short press repeatedly to scroll to BIKE.
4. Short press to enter the BIKE menu.
5. Short press repeatedly to scroll to PWR.
6. Short press to enter the PWR submenu.
7. Short press repeatedly to scroll to CALI.
8. Short press to start the calibration.
The Xplova E5 calibrates and displays the value on screen.
If not calibration value is displayed, repeat the above steps
to re-calibrate the power meter.
9. When done, press to return and exit the menu.