Operation Manual

To pair a Combo (Speed/Cadence) Cadence Sensor: "Scroll through the
BIKE options to [CMB].
Note: Leave the CMB OFF if there is no Combo Cadence Sensor installed on
your bike.
11.Short press [DATA2] to enter the [CMB] submenu.
12.Short press [DATA1] repeatedly to scroll to the option [CMB ON].
13.Short press [DATA2] to scan for the combo sensor, in the meantime,
enable the combo sensor during the scanning. After paired, a set of combo
sensor device ID will be appeared on the screen.
14.if paired successfully. Short press [Return] to confirm the setting and
return to the previous screen.
•
If not, short press [DATA2] to rescan the combo sensor.
15.Short press [Return] to return to the BIKE options.
34
11
12
13
14
14
15
in scanning
& pairing
Enter
Submenu
Enter
SCAN
Return
Rescan
Confirm &
setting
Select
CMB ON