PLEASE READ AND SAVE THESE INSTRUCTIONS PET DRYER + HEATER OWNER’S MANUAL MODEL: B-8S (115V/60Hz) XPOWER MANUFACTURE, INC. 220 Clary Avenue San Gabriel, CA 91776, USA Tel: 626-285-3301 Fax: 626-285-3302 www.xpower.
TABLE OF CONTENTS Introduction .......................................................................................................................................... 1 Operation .............................................................................................................................................. 2 Specifications ........................................................................................................................................ 2 Important Safety Instructions ..
INTRODUCTION Thank you for purchasing an XPOWER B-8S professional force dryer. Featuring advanced BRUSHLESS technology, the B-8S will outlast standard brush motor dryers with its 7,000+ hour motor. Enjoy full control when drying or styling with variable heat and speed controls. Add a stand and stationary styling arm (sold separately) for convenient hands-free drying.
OPERATION 1. Place the dryer on a flat surface. Plug the electrical cord into a 3-prong outlet. 2. Connect the hose to the front hose connector and attach the desired nozzle. 3. Turn variable speed switch to desired speed. 4. To use heating element, choose desired heat setting or leave on off setting. 5. To reduce the risk of injury, close supervision is necessary when the unit is used near children. Do not allow children to play with or around the unit.
SAFETY INSTRUCTIONS WARNING: IMPORTANT SAFETY PRECAUTIONS! When using electrical appliances, especially when children or animals are present, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and personal injury, including, but not limited to the following: • Do not leave the dryer and animal unattended while the product is in use. • Unplug dryer when not in use. • Do not use extension cords with the product. • Do not unplug unit by pulling on cord.
SAVE THESE INSTRUCTIONS HOUSEHOLD and COMMERCIAL USE GROUNDING INSTRUCTIONS This appliance must be grounded. In the event of malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This appliance is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
PART LIST 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Inlet filter Crossed cover Rear cover Motor filter Baffle board cover Baffle board 1 PCB board 1 PCB board 2 Baffle board 2 Motor Motor rubber sleeve Heater Heater cover PCB board 3 21 13 20 19 18 15 16 17 18 19 20 21 22 Power cord 23 Cone nozzle 24 Flat nozzle 25 Round groomer rake 26 Hose Left housing Right housing PCB board 4 Switch panel Heat switch knob Speed switch knob Switch 17 12 16 22 14 11 10 26 25 24 23 9 15 -5- 8 7 6 5 4 3 2 1
MAINTENANCE IMPORTANT! Always turn off the unit and disconnect from electrical outlet before maintenabce or cleaning. Product Maintenance: 1. To keep the Pet Dryer, use a damp cloth to wipe the surface of the housing. Removable part(s) and filters may be cleaned with water and dried thoroughly before reassembling. 2. When not in use, unplug and store the Pet Dryer in a dry place indoors and keep out of reach of children.
XPOWER LIMITED WARRANTY (USA) XPOWER’s Limited Warranty covers the unit (excludes POWER CORD) from defects in material and craftsmanship. The Warranty covers normal use for a term of one year from the original date of purchase including parts, labor, and one way shipping. Non-contiguous states must pay for roundtrip freight. A purchase receipt must be provided.
XPOWER PET PRODUCTS FOR PROFESSIONAL GROOMING INDUSTRY Force Dryers B-3 (2 HP / 8 Amps / 130 CFM) - with vacuuming feature B-4 (3 HP / 10 Amps / 150 CFM) -with vacuuming feature B-8 (4 HP / 12 Amps / 150 CFM) - brushless DC motor with heater B-24 (3 HP / 12 Amps / 150 CFM) - with heater B-25 (4 HP / 12 Amps / 160 CFM) - double motor B-27 (6 HP / 19 Amps / 180 CFM) - double motor Stand Dryers B-16 (1/4 HP / 12 Amps / 300 CFM) B-16S (1/4 HP / 15 Amps / 300 CFM) Cage Dryers X-430TF w/ 430MDK (1/3 HP / 3.
Warranty Registration (for US customer only) For your product warranty, please complete and mail / fax this form to XPOWER MANUFACTURE, INC. Address: 220 Clary Ave., San Gabriel, CA 91776. Tel: 626-285-3301 Fax: 626-285-3302 (For your convenience, register your product online at xpower.
From: TO: XPOWER MANUFACTURE, INC.
