Product Manual

English - 7
Select a Power Source with a Proper Location
• Check the throw distance of the machine. (See Page 10: Technical Specifications)
• Please find a power source with a proper location where the fogging droplets can reach
designated objects.
Start Your Job (Continued)
Start Fogging
• Connect the machine to power source.
• IMPORTANT: Make sure the fogging volume control is on the lowest setting before
turning the power on.
• Turn on the machine and set to designated speed.
• Turn the fogging volume control counterclockwise to set designated fogging volume.
Turn off the Machine
• Turn the fogging volume control clockwise to the lowest setting.
• Turn off the machine and disconnect the machine from its power source.
• IMPORTANT: Discard or use up the liquids in the solution tank. If you are not able
to use up the liquids, transfer the liquids into a safe container, or follow the disposal
instructions of the liquids if applicable.
45°
Tips:
• You could adjust the operation angle for
different applications.
• When working at an angle 45° with the
ground level, the machine can deliver
the fogging droplets to the farthest
distance.
• When working at an angle over 45°, the
fogging volume will decrease due to the
gravatiy. It’s suggest to work at an angle
no more than 45°.